- RS-stocknr.:
- 124-5831
- Fabrikantnummer:
- 71 02 200 T
- Fabrikant:
- Knipex
14 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 61,24
(excl. BTW)
€ 74,10
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 61,24 |
- RS-stocknr.:
- 124-5831
- Fabrikantnummer:
- 71 02 200 T
- Fabrikant:
- Knipex
Wetgeving en conformiteit
Niet conform
- Land van herkomst:
- DE
Productomschrijving
CoBolt® compact bolt cutter
Low effort, high quality cutting results
With precision cutting edges for soft, hard and piano wire
For cutting components such as bolts, nails, rivets etc. with a maximum diameter of 5.2 mm
Particularly high cutting power and low physical effort due to highly efficient gear design
Better cutting performance
Easy cutting of large cross-sections due to micro-serrated cutting edge
With jaws under the hinge to grip and pull wires from Ø 1.0 mm
With two-coloured tapered handles Bi-material sheathing, without collar, for better handling and easier transport
With large support surface on the sheaths for better pressure distribution and more comfortable working
Eyelet clamp for a fall protection device
With precision cutting edges for soft, hard and piano wire
For cutting components such as bolts, nails, rivets etc. with a maximum diameter of 5.2 mm
Particularly high cutting power and low physical effort due to highly efficient gear design
Better cutting performance
Easy cutting of large cross-sections due to micro-serrated cutting edge
With jaws under the hinge to grip and pull wires from Ø 1.0 mm
With two-coloured tapered handles Bi-material sheathing, without collar, for better handling and easier transport
With large support surface on the sheaths for better pressure distribution and more comfortable working
Eyelet clamp for a fall protection device
Technical characteristics :
Length: 200mm
High performance chrome vanadium steel, forged and oil-hardened in several stages.
Micro-serrated cutting edges
Induction hardened cutting edges, hardness of approx. 64 HRC
Eyelet clamp for a fall prevention device.
Induction hardened cutting edges, hardness of approx. 64 HRC
Eyelet clamp for a fall prevention device.
Specificaties
Kenmerk | Waarde |
---|---|
Overall Length | 200 mm |
Cutting Capacity | 6 mm |
Material | High Performance Chrome Vanadium Steel |
- RS-stocknr.:
- 124-5831
- Fabrikantnummer:
- 71 02 200 T
- Fabrikant:
- Knipex