Pedestal Bearing KSTM-12, 12mm ID

  • RS-stocknr. 311-2667
  • Fabrikantnummer KSTM-12
  • Fabrikant Igus
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

IGUS® Maintenance Free Pedestal Bearings

Easy to install pedestal bearings compensate for alignment errors and avoid edge pressures. The housings are manufactured from an impact resistant, rigid, thermoplastic composite material.

High sliding speeds of up to 1.5m/s for rotary movements and 8m/s for linear movements can be supported

Note

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.

//media.rs-online.com/t_line/L311263-01.gif

Flange Units & Pedestal / Pillow Blocks

IGUBAL® pillow block bearings are self-lubricating and require no maintenance. Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments.

Low weight (20% of equivalent steel)
High rigidity
Maintenance free-dry running
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30 to +80°C

Specificaties
Kenmerk Waarde
Inside Diameter 12mm
Material Iglide L280, Igumid G
Centre Height 14mm
Mount Hole Size 5.5 x 9 mm
Length 65mm
Depth 16mm
Overall Height 28mm
Mount Hole Centre-to-Centre 46mm
35 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
61 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
6,67
(excl. BTW)
8,07
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
6,67 €
5 - 9
6,45 €
10 +
6,25 €
Related Products
Angular Contact Bearings are ideally suited to applications ...
Description:
Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy. High Performance - They have a high load carrying capacity and thus allow smaller ...
These bearings are designed to accommodate shaft deflection ...
Description:
These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals ...
SKF thrust ball bearings are designed to hold ...
Description:
SKF thrust ball bearings are designed to hold axial loads produced during shaft rotation and must not be exposed to any radial loads. These bearings consist of two strong and ground thrust plates with matching ball grooves on one side ...
A range of ball bearings which are fitted ...
Description:
A range of ball bearings which are fitted with two synthetic rubber seals to prevent leakage of lubricant as well as entry of dust, water and other harmful material. Accepts radial and axial loads2RS denotes bearing fitted with 2 synthetic ...