SKF Adapter Sleeve H313

  • RS-stocknr. 506-628
  • Fabrikantnummer H313
  • Fabrikant SKF
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: SE
Productomschrijving

Adapter Sleeves for Metric Shafts

Adapter Sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seating, as they can be used on smooth or stepped shafts.

Easy to mount and require no additional location on the shaft
When used on smooth shafts, the bearing can be located at any position on the shaft
When used on stepped shafts together with a stepped ring, bearings can be accurately positioned axially and bearing dismounting is also facilitated
SKF adapter sleeves are supplied complete with lock nut and locking device

Supplied with

lock nut and locking device

//media.rs-online.com/t_line/L0506612-01.gif

Plummer Blocks, Bearing Lubrication and Accessories

Specificaties
Kenmerk Waarde
Type Adapter Sleeve
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
43,65
(excl. BTW)
52,82
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
43,65 €
5 - 9
41,90 €
10 +
41,03 €
Related Products
INA from Schaeffler radial insert ball bearings have ...
Description:
INA from Schaeffler radial insert ball bearings have the inner ring located on the shaft with two grub screws offset by 120°. This location method is suitable for bearing arrangements with a constant direction of rotation or, under low speed ...
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when ...
Description:
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when machine shaft surfaces have been damaged or worn in operation. SKF SPEEDI-SLEEVES eliminate the typical need to replace or rework damaged shafts caused by abrasion due to environmental contaminants, high pressures, speeds ...
Felt ring seals are simple but efficient seals ...
Description:
Felt ring seals are simple but efficient seals for use with grease lubrication. They can be operated at peripheral speeds of up to 4 m/s (800 ft/min). The seals can be used at higher speeds, but a small gap forms ...