Texas Instruments UCC28722DBVT, Battery Charge Controller IC 6-Pin, SOT-23

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Flyback Controller, Current Control, UCC28/UCC38 Series, Texas Instruments

The isolated-flyback power supply controller provides Constant-Voltage (CV) and Constant-Current (CC) output regulation to improve transient response to large load steps. Primary-Side Regulation (PSR) eliminates the need for an Optocoupler.

Flyback Controllers, Texas Instruments

Current-Mode and Voltage-Mode PWM Controller
Primary-Side Regulation
Peak Power Mode
Low Power

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Package Type SOT-23
Pin Count 6
Typical Operating Supply Voltage 9 → 35 V
Dimensions 3.05 x 1.75 x 1.3mm
Length 3.05mm
Maximum Operating Temperature +125 °C
Height 1.3mm
Width 1.75mm
Minimum Operating Temperature -40 °C
150 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,669
(excl. BTW)
0,809
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
0,669 €
6,69 €
50 - 90
0,552 €
5,52 €
100 - 240
0,48 €
4,80 €
250 - 490
0,451 €
4,51 €
500 +
0,423 €
4,23 €
*prijsindicatie
Verpakkingsopties
Related Products
Linear Technology created a wide range of battery ...
Description:
Linear Technology created a wide range of battery charger IC offered in linear or switching topologies. They are suitable for any rechargeable battery chemistry this includes Lithium-Ion (Li-Ion), as well as Nickel Cadmium (NiCD) and Nickel metal hydride (NiMH). LTC ...
This range of battery charger ICs from Analog ...
Description:
This range of battery charger ICs from Analog Devices includes switching, linear and monitoring types. Within this range, some products feature constant current or constant voltage linear charging, stacked lithium monitoring or battery isolation and USB-based battery management. Typical applications ...
Buck-boost NVDC or hybrid power (turbo boost) charger ...
Description:
Buck-boost NVDC or hybrid power (turbo boost) charger for 2-, 3-, or 4-cell Li-ion batteries using all NFETtransistorsInput voltage range: 3.9V to 23.4V (no dead zone)System/battery output voltage: 3.9V to 18.304VBypass mode supported, to connect system to adapterAutonomous charging option ...
The STC3115 includes the hardware functions required to ...
Description:
The STC3115 includes the hardware functions required to implement a low-cost gas gauge for battery monitoring. The STC3115 uses current sensing, Coulomb counting and accurate measurements of the battery voltage to estimate the state-of-charge (SOC) of the battery. An internal ...