ADUCM350BBCZ, Analogue Front End IC, 120-Pin BGA

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

ADuCM350 Precision Meter-on-Chip

The ADuCM350 device is a 16-bit precision, low-power meter-on-a-chip based on an ARM Cortex-M3 processor core. The ADuCM350 is designed with high-precision current, voltage and impedance measurement capabilities. It can be powered by a single coin-cell making it suitable for portable device applications. Suitable applications for the ADuCM350 include point-of-care medical diagnostics and wearable devices monitoring vital signs.

• 16-bit 160kSPS precision ADC with 4 voltage, 8 current measurement channels & impedance measurement engine
• Autonomous analogue front-end (AFE) controller with independent sequencer for AFE functions
• Excitation stage consisting of a Direct Digital Synthesizer/Arbitrary Waveform Generator with 12-bit DAC
• Complex impedance measurement engine based on 2048-point Discrete Fourier Transform with Hann windowing
• 16MHz Cortex-M3 core processor with 384KB Flash memory, 32KB SRAM, 16KB Flash-configured EEPROM
• I²S serial audio output
• Audio 'beeper' interface for piezoelectric speaker
• LCD controller supports driving up to 128 segments
• SPI, I²C and UART serial interfaces
• USB 2.0 Full Speed serial port
• 66 x GPIO pins
• 3 x 16-bit GP Timers, Watch Dog Timer and Wake-Up Timer
• Real-Time Clock
• Pin for optional supercapacitor providing RTC backup
• Capacitive touch subsystem with up to six capacitive touch channels
• Power supply: +2.5 to +3.6Vdc
• Can be powered from a coin-cell
• 4 x Power modes: Active, Core Sleep, System Sleep and Hibernate
• Operating temperature range: -40 to +85°C

Note

An evaluation board for the ADuCM350 is available under RS Part No. 833-5076.

Analogue Front End (AFE), Analog Devices

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Package Type BGA
Pin Count 120
Dimensions 8.1 x 8.1 x 1.08mm
Height 1.08mm
Length 8.1mm
Width 8.1mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
14,44
(excl. BTW)
17,47
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
14,44 €
3 - 16
13,73 €
17 - 86
13,09 €
87 - 173
11,86 €
174 +
10,68 €
Verpakkingsopties
Related Products
The ADAS1000, ADAS1000-1 and ADAS1000-2 from Analog Devices ...
Description:
The ADAS1000, ADAS1000-1 and ADAS1000-2 from Analog Devices are low power, 5 electrode, electrocardiogram (ECG) analogue front ends. They measure electro cardiac (ECG) signals, thoracic impedance, pacing artefacts and lead-on/off status.These devices are designed to simplify the task of acquiring ...
The MAX30003 is a complete, biopotential, analog front-end ...
Description:
The MAX30003 is a complete, biopotential, analog front-end solution for wearable applications. It offers high performance for clinical and fitness applications, with ultra-low power for long battery life. The MAX30003 is a single biopotential channel providing ECG waveforms and heart ...
Description:
The Smart Analog IC by Renesas is a monolithic programmable analog IC integrating an analog front end circuit for processing small sensor signals. Key Applications:Home appliancesIndustrial equipmentHealthcare devices.
The Texas Instruments AFE4403 analogue front-end (AFE) is ...
Description:
The Texas Instruments AFE4403 analogue front-end (AFE) is designed specifically for heart rate monitoring and pulse oximetering. It is composed of a low noise receiver channel, ADC, oscillator and dual LED driver with integrated fault detection. Connect an external microcontroller ...