Power Integrations, AC-DC Converter, 12 V dc 6-Pin, eSIP-7C LNK6779E
- RS-stocknr.:
- 123-5414P
- Fabrikantnummer:
- LNK6779E
- Fabrikant:
- Power Integrations
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Per stuk (geleverd in een tube)
€ 1,76
(excl. BTW)
€ 2,13
(incl. BTW)
Aantal stuks | Per stuk |
|---|---|
| 5 + | € 1,76 |
- RS-stocknr.:
- 123-5414P
- Fabrikantnummer:
- LNK6779E
- Fabrikant:
- Power Integrations
Datasheets
Wetgeving en conformiteit
Productomschrijving
LinkSwitch-HP series Offline AC-DC Converters
The Power Integrations LinkSwitch-HP family of flyback power supply ICs incorporate a primary side regulated controller and high-voltage power MOSFET in a single package. These devices feature ±5% CV accuracy, selectable current limit, programmable latching or hysteretic over-voltage, under-voltage and over-temperature protection, fast AC reset, and programmable shutdown delay time.
Package options:
• eSIP-7C package for vertical orientation with minimum PCB footprint size and simple heat sink mounting using clip or adhesive pad
• eSOP-12B package for low-profile surface mounted ultra-thin designs with heat transfer to PCB via exposed pad and SOURCE pins; both wave and IR reflow soldering supported
• eDIP-12B package for low-profile through-hole mounted ultra-thin designs with heat transfer to PCB via exposed pad or optional metal heat sink
Package options:
• eSIP-7C package for vertical orientation with minimum PCB footprint size and simple heat sink mounting using clip or adhesive pad
• eSOP-12B package for low-profile surface mounted ultra-thin designs with heat transfer to PCB via exposed pad and SOURCE pins; both wave and IR reflow soldering supported
• eDIP-12B package for low-profile through-hole mounted ultra-thin designs with heat transfer to PCB via exposed pad or optional metal heat sink
• Multi-mode control maximizes efficiency over full load range
• No-load consumption below 30 mW at 230 VAC
• >75% efficiency with 1 W input at 230 VAC
• >50% efficiency with 0.1 W input at 230 VAC
• Dramatically simplifies power supply designs
• Eliminates opto-coupler and all secondary control circuitry
• ±5% or better output voltage tolerance
• 132 kHz operation reduces transformer and power supply size
• Compensation over line limits overload power
• Frequency jittering reduces EMI filter cost
• Fully integrated soft-start for minimum start-up stress
• Auto-restart limits power delivery to 3% during overload faults
• No-load consumption below 30 mW at 230 VAC
• >75% efficiency with 1 W input at 230 VAC
• >50% efficiency with 0.1 W input at 230 VAC
• Dramatically simplifies power supply designs
• Eliminates opto-coupler and all secondary control circuitry
• ±5% or better output voltage tolerance
• 132 kHz operation reduces transformer and power supply size
• Compensation over line limits overload power
• Frequency jittering reduces EMI filter cost
• Fully integrated soft-start for minimum start-up stress
• Auto-restart limits power delivery to 3% during overload faults
AC-DC Converters, Power Integrations
Specificaties
Kenmerk | Waarde |
|---|---|
| Maximum Input Voltage | 265 V ac |
| Maximum Output Voltage | 12 V dc |
| Mounting Type | Through Hole |
| Pin Count | 6 |
| Dimensions | 10.24 x 2.06 x 8.25mm |
| Maximum Output Current | 2.5A |
| Package Type | eSIP-7C |
| Input Voltage Range | 85 → 265 V ac |
| Current Limit | 3.63A |
| Minimum Input Voltage | 85 V ac |
| Maximum Operating Temperature | +150 °C |
| Length | 10.24mm |
| Width | 2.06mm |
| Height | 8.25mm |
| Minimum Operating Temperature | -40 °C |
| Typical Operating Supply Voltage | 230 V ac |
| Output Current Range | Maximum of 2.5 A |
| Operating Temperature Range | -40 → +150 °C |
| Output Voltage Range | 12 V dc |