3M Roloc Scotch-Brite Aluminium Oxide Deburring & Finishing Wheel, 50.8 mm, 76.2 mm Diameter, Medium

The Scotch-Brite™ Roloc™ disc is a surface conditioning disc that combines a long lasting abrasive and 3M's Roloc™ attachment system. The compressed non-woven disc uses aluminium oxide mineral abrasive offering a continuous fast cutting action and consistency. The fibres use resin which will dissolve and break down over time, allowing them to stay strong and heat resistant. Suitable for removing paint and rust from seams, doors, moulding, welds and other tight areas.

The unique construction of the Scotch-Brite™ disc is made up of non-woven fibres and aluminium oxide abrasive making it tough and durable. The open web material is kept consistent as the open web material runs cool, limiting fibres to clog up.

The Scotch Brite™ surface conditioning disc allows for easy adaptation to a profiled surface. It has been designed to last longer than wire brushes and other abrasive discs. The abrasive density allows for an aggressive cutting power for effective deburring without damaging the part.

The Roloc™ system from 3M™ provides a secure attachment on heavy duty applications. It allows for Roloc discs to be quickly swapped out from one application to another in seconds. The plastic threaded button or screw is designed to easily and quickly screw on a Roloc TR disc pad.

• Strong unitised construction provides effective edge deburring and finishing
• Hard densities offer good edge retention, to help maintain a consistent shape and cutting action
• Soft densities offer conformability and flexibility for finishing flat, contoured, or irregular surfaces without damaging the part
• Compressed, open-web construction and uniform grain distribution provides consistent cutting action
• 3M™ Roloc™ attachment system offers quick and easy disc change-out for multi-step finishing processes

• Removing paint, rust, harden adhesives, light scratches and weld burns and more.
• Great for smoothing, polishing and cleaning most metals.

Benefits of using a non-woven disc?

Non-woven discs provide a uniformed and consistent performance throughout its lifetime. They are flexible to allow the material to adapt and conform to irregular surfaces. the open construction allows for air circulation for cool operation and reduces the potential for burning.

3M is a leading innovator of abrasive technologies, constantly evolving to provide ideal solutions to industrial and commercial applications. With 3M you can be assured of a wide selection of quality products.

Cut, grind and smooth out a surface using this abrasive wheel from 3M. The abrasive is held together by a resin that breaks down over time, so you can be sure it runs reliably cool, even at high speeds. Thanks to the medium-grade grit, you'll find it suitable for your deburring and finishing tasks. The non-woven construction means the wheel conforms to uneven shapes, making it ideal for getting at paint and rust in awkward places.

• Roloc attachment system enables quick tool mounting
• Aluminium oxide abrasive delivers rapid cutting
• Uniform grain distribution for consistency
• Open-web construction enables air circulation to cut the risk of over-heating

• Automotive engineering
• Metalworking
• Oil and gas industry

It has a maximum safe speed of 15,100rpm, at which it delivers a fast cutting rate while maintaining its structural integrity.