RS PRO Lithium Thionyl Chloride AA Battery 3.6V

RS PRO Lithium Thionyl Chloride AA Battery with PCB pin

Lithium-thionyl chloride (Li-SOCl2) AA battery with PCB pin from our RS PRO range.
These lithium batteries have been designed for use in various applications such as computer memory backup and clock support.
These batteries use lithium thionyl chloride so they have a high energy density, low self -discharge rate, ideal for lengthy storage periods plus they are fully compliant with IEC60086-4 safety standards.
These AA batteries have an operating temperature -60ﾟC → +85ﾟC and are resistant to wet environments making them suitable for indoor and outside.

Features and Benefits:
• High operating voltage
• Low self-discharge rate for extended life
• Superior resistance to humid environments
• Non-flammable
• UL Component Recognition
• Non-rechargeable and should not be recharged
• Ease of use
• Great shelf life - long storage and operational life (10 years)
• Battery size: AA
• Capacity: 2600mAh

Typical Applications:
Lithium Thionyl Chloride speciality size batteries are used in electronic devices that require a small, compact source of power. Example applications include:
• System Backups
• Real-Time Clocks
• Memory Backups
• Clock Supports
• Automotive Electronics
• Professional Electronics

FAQ’s
Are Lithium Thionyl Chloride Batteries Harmful?
Lithium Thionyl Chloride batteries can sometimes leak a substance called potassium hydroxide which is a caustic agent that can cause eye, skin and respiratory irritations. This risk is reduced by not mixing different manufacturer battery types, batteries of different chemistries and by the replacement of all batteries at the same time.
How to dispose of Lithium Thionyl Chloride Batteries?
Recycle responsibly, a wide range of schemes are available.

Safety Advice
• Keep out of sight and reach of children.
• Fire, explosion and burn hazard - Do not recharge, short circuit, crush, disassemble, heat above 100ﾟC (212ﾟF), incinerate
• Due to the high terminal voltage (3.6V), they are not suitable as direct replacements for other battery technologies in the same can sizes.
Guidance:
• Always install the batteries correctly as per instruction
• Ensure that the contact points are clean and conductive
• Do not mix different types of battery
• Do not heat or attempt to recharge the battery
• Do not dispose of in a fire

RS PRO 3.6V Lithium Thionyl Chloride AA Battery

RS PRO lithium thionyl chloride AA battery is suitable for low to medium current drain applications such as memory
back up, clock support etc.