Ultimaker Hot End Pack for use with 2 Extended, Go, Ultimaker 2

  • RS-stocknr. 908-2947
  • Fabrikantnummer 1552
  • Fabrikant Ultimaker
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: NL
Productomschrijving

Hot end pack for Ultimaker 2

The Ultimaker 2 hot end bundle

Note

Only compatible with the Ultimaker 2 Family

Supplied with

Integrated nozzle, heater block Glass filled PTFE coupler, hot end isolator, Spring, Set screw, PT100 sensor, PTFE coupler ring

Ultimaker Accessories

Specificaties
Kenmerk Waarde
Product Type Hot End Pack
For Use With Go, Ultimaker 2, 2 Extended
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
115,09
(excl. BTW)
139,26
(incl. BTW)
Aantal stuks
Per stuk
1 +
115,09 €
Related Products
The Olsson block brass Jet nozzles have a ...
Description:
The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip ...
The Olsson block Stainless Steel Jet nozzle has ...
Description:
The Olsson block Stainless Steel Jet nozzle has a special tip angle and shoulder width, it also has a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them ...
BQ original Classic Hot-end HeatCore equipped with thermal ...
Description:
BQ original Classic Hot-end HeatCore equipped with thermal connector and a 100k NTC resistor. MK7 Nozzle Diameter 0.4 mm, compatible for 1.75 filamentThermobarrier including Teflon inlay (tube)Fast connecting 12 V 40W ceramic heater cartridge with connectorFast connecting 100K thermistor (NTC) ...
Hot-End HeatCore Double Drive Gear with easy access ...
Description:
Hot-End HeatCore Double Drive Gear with easy access to PTFE tube for replacement.0.4 mm nozzle, compatible with 1.75 mm filament. 0.4 mm nozzleFor 1.75 mm filament1 x Hot-End with Ceramic Heating Cartridge 40W 12V and Thermistor NTC 100K 100K NTC ...