Ultimaker Bowden Tube for use with Ultimaker 2

  • RS-stocknr. 908-2938
  • Fabrikantnummer 1696
  • Fabrikant Ultimaker
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: NL
Productomschrijving

Bowden Tube for Ultimaker 2

Bowden Tube for use with Ultimaker 2

Filament transportation device

Note

Not compatible with Ultimaker 2 Go

Supplied with

Includes two Clamp Clips and two Tube Coupling Collets

Ultimaker Accessories

Specificaties
Kenmerk Waarde
Product Type Bowden Tube
For Use With Ultimaker 2
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
22 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
31,46
(excl. BTW)
38,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
31,46 €
Related Products
The Olsson block brass Jet nozzles have a ...
Description:
The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip ...
The Olsson block Stainless Steel Jet nozzle has ...
Description:
The Olsson block Stainless Steel Jet nozzle has a special tip angle and shoulder width, it also has a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them ...
Hot-End HeatCore Double Drive Gear with easy access ...
Description:
Hot-End HeatCore Double Drive Gear with easy access to PTFE tube for replacement.0.4 mm nozzle, compatible with 1.75 mm filament. 0.4 mm nozzleFor 1.75 mm filament1 x Hot-End with Ceramic Heating Cartridge 40W 12V and Thermistor NTC 100K 100K NTC ...
The Ultimaker Professional 3D printing just got more ...
Description:
The Ultimaker Professional 3D printing just got more accessible. Maximize the print performance and machine uptime with our swappable, material-matching print cores. Make the most out of reliable build and support material combinations for geometric freedom or print in dual ...