RS PRO Build Plate for use with IdeaWerk

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

RS Pro Ideawerk Plus Replacement Build Plate

RS Pro IdeaWerk 2 Replacement Build Plate for RS Idealwerk Plus 3D printer (RS 862-5705)

Building Plate: 150 x 150 x 1.6mm

RS Pro Ideawerk Accessories

Specificaties
Kenmerk Waarde
Product Type Build Plate
For Use With IdeaWerk
7 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
11,87
(excl. BTW)
14,36
(incl. BTW)
Aantal stuks
Per stuk
1 +
11,87 €
Related Products
The Olsson block brass Jet nozzles have a ...
Description:
The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip ...
The Olsson block Stainless Steel Jet nozzle has ...
Description:
The Olsson block Stainless Steel Jet nozzle has a special tip angle and shoulder width, it also has a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them ...
The Robox replacement Dual Material head consists of ...
Description:
The Robox replacement Dual Material head consists of 2 independently controlled heated nozzles each with the unique Robox needle valve control system. Allows you to print with 2 materials or 2 colours in the same material on the same layer. ...
The 1.75 mm plastic extruder from Zmorph is ...
Description:
The 1.75 mm plastic extruder from Zmorph is a basic solution for single material 3D printing. The extruder is made from aluminium and stainless steel, while brass filament drives (toothed pulley) ensure the filament is gripped securely and doesn’t slip. ...