Sprockets

Filters

1 - 20 van 85 producten worden weergegeven
Resultaten per pagina
Sorteren op
Omschrijving Prijs To Fit British Standard Chain Type Number of Teeth Bore Type Maximum Bore Diameter Pitch Diameter Material Sprocket Width
RS-stocknr. 184-145
FabrikantRS Pro
19,59 €
Each
08B-1 19 Taper Bush - 77.16mm Steel -
RS-stocknr. 182-880
FabrikantRS Pro
2,82 €
Each
05B-1 13 Pilot 10mm 39.79mm Steel 35mm
RS-stocknr. 183-439
FabrikantRS Pro
5,77 €
Each
08B-1 16 Pilot 12mm 48.82mm Steel 35mm
RS-stocknr. 183-489
FabrikantRS Pro
15,63 €
Each
08B-1 30 Pilot 14mm 91.12mm Steel 40mm
RS-stocknr. 183-495
FabrikantRS Pro
38,46 €
Each
12B-1 19 Taper Bush - 115.75mm Steel -
RS-stocknr. 182-896
FabrikantRS Pro
3,46 €
Each
05B-1 16 Pilot 12mm 48.82mm Steel 35mm
RS-stocknr. 183-704
FabrikantRS Pro
4,39 €
Each
06B-1 18 Pilot 12mm 54.85mm Steel 35mm
RS-stocknr. 183-322
FabrikantRS Pro
9,66 €
Each
06B-1 17 Taper Bush - 51.83mm Steel -
RS-stocknr. 184-088
FabrikantRS Pro
8,87 €
Each
06B-1 30 Pilot 14mm 91.12mm Steel 40mm
RS-stocknr. 183-467
FabrikantRS Pro
6,79 €
Each
08B-1 18 Pilot 12mm 54.85mm Steel 35mm
RS-stocknr. 183-265
FabrikantRS Pro
14,95 €
Each
08B-1 17 Taper Bush - 69.11mm Steel -
RS-stocknr. 183-170
FabrikantRS Pro
21,41 €
Each
08B-1 38 Pilot 16mm 115.35mm Steel 40mm
RS-stocknr. 183-142
FabrikantRS Pro
3,25 €
Each
05B-1 15 Pilot 12mm 45.81mm Steel 35mm
RS-stocknr. 184-729
FabrikantRS Pro
5,41 €
Each
05B-1 25 Pilot 14mm 76mm Steel 40mm
RS-stocknr. 183-710
FabrikantRS Pro
7,81 €
Each
06B-1 27 Pilot 14mm 82.05mm Steel 40mm
RS-stocknr. 184-864
FabrikantRS Pro
8,55 €
Each
05B-1 38 Pilot 16mm 115.35mm Steel 40mm
RS-stocknr. 183-259
FabrikantRS Pro
12,22 €
Each
06B-1 30 Taper Bush - 91.12mm Steel -
RS-stocknr. 183-675
FabrikantRS Pro
4,67 €
Each
06B-1 19 Pilot 12mm 57.87mm Steel 35mm
RS-stocknr. 183-271
FabrikantRS Pro
9,90 €
Each
06B-1 20 Taper Bush - 60.89mm Steel -
RS-stocknr. 183-136
FabrikantRS Pro
2,75 €
Each
05B-1 14 Pilot 12mm 42.8mm Steel 35mm

Sprockets

Power transmission sprockets are toothed wheels that interlock with a chain, track or other perforated material. The teeth fit exactly into the item that it is designed to move, therefore they must be tough and hard-wearing. Sprockets differ from gears as they work independently and do not interlock. In power transmission applications, such as gearboxes, drive chains and conveyer chains, sprockets transmit shaft rotation to chains and vice versa. When there is an even number of pitches in the chain, by using a sprocket with an odd number of teeth, this results in uniform wear over both the chain and sprocket teeth.Within our range, we supply two main types of sprockets. Pilot bore sprockets that are supplied with a standard shaft hole and must be rebored to fit the shaft it is to be used with. And tapered bush sprockets that have been already been bored to fit a bush to use with the shaft. Various numbers of teeth and pitches are available.