DC Motors

DC motors are the most widely used type of motor with initial costs typically less than AC systems for low-power units. DC motors can be used for a wide range of applications from small tools and appliances, through to electric vehicles, lifts and hoists. DC Motors speed can be controlled by varying the supply voltage and are available in a wide range of voltages, however the most popular type are 12 V and 24 V, with some of the advantages being:

  • Easy installation
  • Speed control over a wide range
  • Quick Starting, Stopping, Reversing and Acceleration
  • High Starting Torque
  • Linear speed-torque curve

Types of DC Motors
There are two common types of DC motor, brushless and brushed. In both brushless and brushed motors, magnets drive the spinning (rotary) motion of the motor shaft.

  • Brushed Motors These are a more traditional type of motor and are typically used in cost-sensitive applications, where control systems are relatively simple, such as in consumer applications and more basic industrial equipment.
  • Brushless Motors Brushless motors alleviate some of the issues associated with brushed motors such as short life span for high use applications and are mechanically much simpler in design (not having brushes). The advantages of brushless motors are longer life, little maintenance and high efficiency (85-90%). These types of motors are generally used in speed and positional control with applications such as fans, pumps and compressors, where reliability and ruggedness are required.

...
Lees meer Lees minder

Filters

21 - 40 van 962 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Supply Voltage DC Motor Type Power Rating Output Speed Shaft Diameter Maximum Output Torque Gearhead Type Length Gear Ratio Width Depth Dimensions Current Rating Core Construction
RS-stocknr. 258-8388
FabrikantRS PRO
52,16 €
Each
Aantal stuks
24 V dc Geared - 5 rpm 5mm 30 Ncm Spur 66.8mm - 27.7mm - - - Iron Core
RS-stocknr. 901-3291
FabrikantRS PRO
88,68 €
Each
Aantal stuks
12 V dc Brushed Geared - 80 rpm 6mm 20 Ncm Spur 73.7mm 60:1 38mm 38mm 73.7 x 38 x 38 mm - Iron Core
RS-stocknr. 263-5995
FabrikantRS PRO
164,52 €
Each
Aantal stuks
24 V Servo 30 W 1600 rpm 6mm 27 Ncm - 64mm - 66mm - 66 (Dia.) x 64 mm 1.3 A -
RS-stocknr. 238-9822
FabrikantRS PRO
15,74 €
Each
Aantal stuks
12 → 24 V dc Brushed Geared 1.62 W 2 → 4199 rpm 2mm 25 gcm Spur 52mm - 110mm - - 300 mA Iron Core
RS-stocknr. 901-3317
FabrikantRS PRO
88,68 €
Each
Aantal stuks
24 V dc Brushed Geared - 80 rpm 6mm 20 Ncm Spur 73.7mm 60:1 38mm 38mm 73.7 x 38 x 38 mm - Iron Core
RS-stocknr. 752-2005
FabrikantRS PRO
13,14 €
Each
Aantal stuks
6 V Brushed 0.58 W 13500 rpm 2.5mm 3.9 gcm - 15.1mm - 12mm 10mm 15.1 x 12 x 10 mm 320 mA Metal
RS-stocknr. 420-669
FabrikantRS PRO
42,20 €
Each
Aantal stuks
12 V dc Brushed Geared 19.8 W 309 rpm 6mm 29 Ncm Spur 79.1mm - 37mm - - 2.81 A Iron Core
RS-stocknr. 892-8732
FabrikantRS PRO
34,66 €
Each
Aantal stuks
2.8 V Hybrid, Permanent Magnet Stepper - - 5mm - - - - - 62mm - 1.68 A -
RS-stocknr. 238-9737
FabrikantRS PRO
5,15 €
Each
Aantal stuks
6 → 15 V - 7.98 W 9869 rpm 2.31mm 78.4 gcm - 38mm - - - 27.7 (Dia.) x 38 mm 990 mA Iron Core
RS-stocknr. 454-0849
FabrikantRS PRO
32,61 €
Each
Aantal stuks
12 V dc Brushed Geared 7.98 W 79 rpm 6mm 59 Ncm Spur 67mm - 35 (Dia.)mm - - 990 mA Iron Core
RS-stocknr. 420-568
FabrikantRS PRO
39,11 €
Each
Aantal stuks
4.5 - 15 V dc Brushed Geared 7.9 W 248 rpm 6mm 2432 gcm Spur 67.6mm - 37mm - - 990 mA Iron Core
RS-stocknr. 892-8751
FabrikantRS PRO
176,17 €
Each
Aantal stuks
24 V Brushless - 3500 rpm 6.2mm 0.05 Nm - 80.7mm - 22mm - 22 (Dia.) x 80.7 mm 1.5 A -
RS-stocknr. 834-7631
FabrikantRS PRO
33,70 €
Each
Aantal stuks
12 V dc Brushed Geared 7 W 72 rpm 6mm 59 Ncm Spur 71mm - 37 (Dia.)mm - 37 (Dia.) x 70.9 mm 840 mA Iron Core
RS-stocknr. 238-9636
FabrikantRS PRO
12,42 €
Each
Aantal stuks
3 V dc Brushed Geared 1.29 W 2 → 3700 rpm 2mm 10.92 gcm Spur 52mm - 110mm - - 1.05 A Iron Core
RS-stocknr. 238-9670
FabrikantRS PRO
33,12 €
Each
Aantal stuks
12 V dc Brushed Geared 19.8 W 98 rpm 6mm 59 Ncm Spur 78mm - 37mm - - 2.81 A Iron Core
RS-stocknr. 535-0502
FabrikantRS PRO
84,24 €
Each
Aantal stuks
2.5 V Hybrid, Permanent Magnet Stepper - - 6.35mm - - - - - 56mm - 2.8 A -
RS-stocknr. 834-7657
FabrikantRS PRO
43,81 €
Each
Aantal stuks
12 V dc Brushed Geared 7 W 153 rpm 6mm 29 Ncm Spur 73.7mm - 37 (Dia.)mm - 37 (Dia.) x 73.7 mm 840 mA Iron Core
RS-stocknr. 535-0467
FabrikantRS PRO
32,56 €
Each
Aantal stuks
2.8 V Hybrid, Permanent Magnet Stepper - - 5mm - - - - - 33mm - 1.33 A -
RS-stocknr. 536-6030
FabrikantRS PRO
102,50 €
Each
Aantal stuks
24 V Brushless - 4000 rpm 5mm 0.75 Nm - 100mm - 42mm 42mm 100 x 42 x 42 mm 20 A -
RS-stocknr. 420-710
FabrikantRS PRO
41,62 €
Each
Aantal stuks
12 V dc Brushed Geared 0.47 W 8 rpm 3mm 24 Ncm Planetary 56.5mm - 16mm - - 115 mA Iron Core