- RS-stocknr.:
- 177-2820
- Fabrikantnummer:
- KSZ8081RNDCA-TR
- Fabrikant:
- Microchip
1000 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk (op een rol 1000)
€ 0,92
(excl. BTW)
€ 1,11
(incl. BTW)
Aantal stuks | Per stuk | Per reel* |
1000 + | € 0,92 | € 920,00 |
*prijsindicatie |
- RS-stocknr.:
- 177-2820
- Fabrikantnummer:
- KSZ8081RNDCA-TR
- Fabrikant:
- Microchip
Datasheets
Wetgeving en conformiteit
Productomschrijving
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution.
Ethernet transceiver
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)
Specificaties
Kenmerk | Waarde |
---|---|
Standard Supported | IEEE 802.3 |
Number of Channels per Chip | 1 |
Typical Data Rate | 100Mbit/s |
Integrated CDR | Yes |
Mounting Type | Surface Mount |
Package Type | QFN |
Pin Count | 24 |
Dimensions | 4 x 4 x 0.83mm |
Maximum Operating Temperature | +70 °C |
Minimum Operating Temperature | 0 °C |