- RS-stocknr.:
- 102-6131
- Fabrikant:
- RS PRO
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
98 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 64,44
(excl. BTW)
€ 77,97
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 64,44 |
5 - 9 | € 61,85 |
10 - 24 | € 61,22 |
25 + | € 57,99 |
- RS-stocknr.:
- 102-6131
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
RS PRO Voltage Monitoring Relay With SPDT Contacts, 1 Phase, Overvoltage, Undervoltage
This monitoring relay from RS PRO trips a circuit breaker when the voltage supply drops too low or exceeds a certain level. It's used to prevent damage to equipment in the event of abnormal voltage conditions.
The microprocessor-based relay has red and green LED lights that allow you to clearly see the relay and supply status. To ensure safe operation, it senses undervoltage ranging from 173 V to 218 V and overvoltage ranging from 242 V to 288 V. It also allows for a time delay adjustment to prevent tripping from temporary dips in voltage.
The microprocessor-based relay has red and green LED lights that allow you to clearly see the relay and supply status. To ensure safe operation, it senses undervoltage ranging from 173 V to 218 V and overvoltage ranging from 242 V to 288 V. It also allows for a time delay adjustment to prevent tripping from temporary dips in voltage.
Features and Benefits
• SPDT (Single Pole Double Throw) contact configuration
• Dimensions of 66.5 (length) x 17.5 (width) x 89 mm (height)
• One phase
• Frequency sensing range of 48 to 63 Hz
• DIN rail mounting type
• One pole
• Operating temperature range of -20°C to +60°C
• Special features include two LEDs to indicate operational states, adjustment for time delay, adjustment for undervoltage trip level, microprocessor-based relay, monitoring of own supply to detect if it exceeds the set under or overvoltage trip levels, true RMS (rotronic monitoring system) monitoring
• Meets CE, EMC (electromagnetic compatibility), EN 61000-6 and IEC standards
• Supply voltage of 230 V AC
• Screw terminal type
• Time delay of 0.2 to 10 s
• Dimensions of 66.5 (length) x 17.5 (width) x 89 mm (height)
• One phase
• Frequency sensing range of 48 to 63 Hz
• DIN rail mounting type
• One pole
• Operating temperature range of -20°C to +60°C
• Special features include two LEDs to indicate operational states, adjustment for time delay, adjustment for undervoltage trip level, microprocessor-based relay, monitoring of own supply to detect if it exceeds the set under or overvoltage trip levels, true RMS (rotronic monitoring system) monitoring
• Meets CE, EMC (electromagnetic compatibility), EN 61000-6 and IEC standards
• Supply voltage of 230 V AC
• Screw terminal type
• Time delay of 0.2 to 10 s
Specificaties
Kenmerk | Waarde |
---|---|
Monitoring Application | Voltage |
Electrical Phase | 1 |
Contact Configuration | SPDT |
Voltage Sensitivity | Overvoltage, Undervoltage |
Mounting Type | DIN Rail |
Time Delay | 0.2 → 10s |
Frequency Sensing Range | 48 → 63Hz |
Series | L |
Number of Poles | 1 |
Minimum Operating Temperature | -20°C |
Operating Temperature Range | +60°C |
Maximum Operating Temperature | +60°C |
Dimensions | 17.5 x 66.5 x 89mm |
Height | 89mm |
Maximum Frequency Sensed | 63Hz |
Length | 66.5mm |
Minimum Frequency Sensed | 48Hz |
Special Features | 2 LEDs for the Indication of Operational States, Adjustment for Time Delay, Adjustment for Undervoltage Trip Level, Microprocessor Based Relay, Monitors Own Supply & Detects if The Supply Exceeds The Set Under or Over Voltage Trip Levels, True RMS Monitoring |
Terminal Type | Screw |
Width | 17.5mm |