- RS-stocknr.:
- 248-1962
- Fabrikantnummer:
- 74 91 250
- Fabrikant:
- Knipex
11 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 53,73
(excl. BTW)
€ 65,01
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 53,73 |
- RS-stocknr.:
- 248-1962
- Fabrikantnummer:
- 74 91 250
- Fabrikant:
- Knipex
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
Central cutting pliers 250mm
Features / Benefits :
With integrated rotation axis for extreme and continuous use
With precision cutting edges for soft, hard and piano wire
Cuts thick wires with less physical effort than with side cutters of the same length
Precision cutting edges in the centre
High cutting power and low physical effort due to perfectly matched cutting angle and transmission ratio
Induction hardened cutting edges, hardness approx. 64 HRC
With precision cutting edges for soft, hard and piano wire
Cuts thick wires with less physical effort than with side cutters of the same length
Precision cutting edges in the centre
High cutting power and low physical effort due to perfectly matched cutting angle and transmission ratio
Induction hardened cutting edges, hardness approx. 64 HRC
High performance chrome vanadium steel, forged and oil-hardened in several stages.
Specificaties
Kenmerk | Waarde |
---|---|
Model Number | 74 91 |
Cutter Type | Centre Cutters |
Overall Length | 250 mm |
VDE/1000V Approved | No |
Material | Chrome Vanadium Electric Steel |
Maximum Cutting Capacity | 5mm |
Cutting Capacity Piano Wire | 3.5mm |
Cutting Capacity Copper Wire | 5mm |
Cutting Capacity Soft Steel Wire | 5mm |
Cutting Capacity Hard Wire | 3.8mm |
Cutting Capacity Stranded Wire | 5mm |
- RS-stocknr.:
- 248-1962
- Fabrikantnummer:
- 74 91 250
- Fabrikant:
- Knipex