TDK NLV-PF Series Type 1210 Wire-wound SMD Inductor 5.6 μH ±5% Wire-Wound 200mA Idc Q:30

  • RS-stocknr. 108-4674
  • Fabrikantnummer NLV32T-5R6J-PF
  • Fabrikant TDK
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

TDK 1210 NLV Series Wire Wound Inductors

SMD wound coil inductors suitable for a wide range of signal line applications
High Q factor ensures sharp frequency response
Highly heat resistant thermoplastic resin exterior package
Operating temperature range -40°C to +105°C
Applications include: TVs, VCRs, digital cameras, xDSL, car audio, ECU systems, HDDs, etc

Specificaties
Kenmerk Waarde
Inductance 5.6 μH
Maximum DC Current 200mA
Package/Case 1210 (3225M)
Length 3.2mm
Depth 2.5mm
Height 2.2mm
Dimensions 3.2 x 2.5 x 2.2mm
Tolerance ±5%
Maximum DC Resistance 1.6Ω
Series NLV-PF
Maximum Self Resonant Frequency 45MHz
Minimum Operating Temperature -40°C
Maximum Operating Temperature +105°C
Inductor Construction Wire-Wound
Minimum Quality Factor 30
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24/12/2019, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Reel of 2000
161,13
(excl. BTW)
194,97
(incl. BTW)
Reel(s)
Per reel
Per stuk*
1 - 9
161,13 €
0,081 €
10 - 19
145,01 €
0,073 €
20 - 24
133,33 €
0,067 €
25 - 49
128,21 €
0,064 €
50 +
125,79 €
0,063 €
*prijsindicatie
Related Products
SPM4012 Series magnetic shield type wound inductor for ...
Description:
SPM4012 Series magnetic shield type wound inductor for power circuits use a metallic magnetic materialSPMSPM4012 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coilsThey have a low-profile with maximum heights of 1.2mm ...
Wurth WE-HCF Series Wire Wound Magnetically shielded Common ...
Description:
Wurth WE-HCF Series Wire Wound Magnetically shielded Common Mode Chokes with a saturation current of up to 75A and a Current capability of up to 32A. Applications for the WE-HCF Series include:- Storage inductor for high efficiency DC/DC converters; Single ...
Miniature SMD common-mode wire wound chip filtersCommon-mode impedance ...
Description:
Miniature SMD common-mode wire wound chip filtersCommon-mode impedance >1000Ω at 100MHz Due to low differential mode impedance there is almost no affect upon high speed signals 2-line and 3-line type availableOperating temperature range -25°C to +85°C Applications include radiation and ...
Subminiature coil inductors with ferrite core for general ...
Description:
Subminiature coil inductors with ferrite core for general use.High quality and low DC resistance.These chips are ideal for increasing the performance of electronic circuits in video, communications, audio equipment and mobile telephones.