Pulley 46mm Outside Diameter, 8mm Bore

  • RS-stocknr. 352-0686
  • Fabrikantnummer AC8MDP46/1A/D
  • Fabrikant BNL
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

BNL Pulley

Acetal pulleys with stainless steel or carbon steel balls as standard.

Features and Benefits

• Medium duty pulley • Acetal impervious to water
• Pulley 1449418 has Stainless Steel ball bearings
• Excellent performance

Product Application Information

Carbon steel - Can be used in dry applications Stainless steel - Can be used in damp applications with mild detergents

Prefixes

AC - Caged AF - Full complement

Single & Double Row Bearing

Acetal pulleys offer long term wear performance and excellent dimensional stability when subjected to load, temperature and most fluids. Working temperature range: -40°C to +100°C. Balls are either Carbon Steel or Stainless Steel; the latter is more suited to wet applications as it is non-corrosive.

Specificaties
Kenmerk Waarde
Number of Grooves 1
Overall Diameter 46mm
Pulley Width 24mm
Bore 8mm
Material Acetal
196 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
242 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
9,76
(excl. BTW)
11,81
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
9,76 €
5 - 9
9,45 €
10 +
9,14 €
Related Products
Manufacture of pulleys conforms to ISO 4183Compatible with ...
Description:
Manufacture of pulleys conforms to ISO 4183Compatible with all manufactured HTD® beltsDesigned to be used with appropriate taper.
8mm pitch x 30mm wide beltManufactured from high ...
Description:
8mm pitch x 30mm wide beltManufactured from high strength steelDesigned to be used with synchronous HTD beltsEasily re-bored to required shaft size.
Part of an extensive range of High Torque ...
Description:
Part of an extensive range of High Torque Drive (HTD) timing pulleys in pilot bore type and taper lock bush type. The material used for smaller pulleys is Aluminium, medium sizes are in Steel, larger sizes in Cast Iron, all ...
INA from Schaeffler Idler pulley units are tensioning ...
Description:
INA from Schaeffler Idler pulley units are tensioning systems for belt drives and idler units. The ready-to-fit units comprise deep drawn, profiled sheet steel pulley halves riveted together and deep groove ball bearings. Pulleys of larger diameters are also welded ...