Chauvin Arnoux CA742 IP2X Voltage Indicator Continuity Check CAT IV 600 V

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA742

Chauvin Arnoux CA742 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0021 ) and with IP2X accessories ( 914-0025 ). The CA742 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA742 checks the electrical circuits, the power supply, the display and the condition of the measurement leads.

Features and Benefits

Full integrated autotest
Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC
Single-pole phase test
Phase sequence testing up to 400 Hz
Input impedance >300 kΩ
Continuity testing
Removable test probe and cable
Dimensions 163 x 64 x 40 mm
IP65 protection rating
Weight 210 g

Note

The voltages indicated on the CA742 are nominal voltages - users must ensure the device will be used on networks at standardised voltages.

Standards

EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011

Supplied with

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated
by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Specificaties
Kenmerk Waarde
Maximum Voltage 690 V ac, 750V dc
Continuity Check Yes
Safety Category CAT IV 600V
Display Type LED
IP Rating IP65
Battery Type AAA Battery, LR3 Battery
Power Source Battery
Dimensions 163 x 64 x 40mm
Weight 210g
Height 40mm
Length 163mm
Maximum Operating Temperature +45°C
Safety Category Voltage 600V
Safety Category Level CAT IV
Model Number p CA742 IP2X
Minimum Operating Temperature -15°C
Width 64mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 01/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
73,00
(excl. BTW)
88,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
73,00 €
Kalibratie-opties
Related Products
JUPITER+ is a system for identifying cables in ...
Description:
JUPITER+ is a system for identifying cables in a trench, gutter or cable shelf. Each of the functions is carried out on unpowered MV & LV cables (customer loads online). The signals and the physical principles used are common for ...
The 8031F tester indicates phase sequence by a ...
Description:
The 8031F tester indicates phase sequence by a rotating disc which gives clear feedback. A system of lamps also indicates open circuit phases.Small, lightweight and compact in design with no exposed metal parts. A test button is incorporated in the ...
Chauvin Arnoux TX0001-Z Voltage and continuity tester allow ...
Description:
Chauvin Arnoux TX0001-Z Voltage and continuity tester allow you to control AC and DC voltages. The Phase tracking system with audible and visual warning of the voltmeter makes your work more efficient and convenient. The self-test function checks the status ...
All electricians need a two-pole tester. The Fluke ...
Description:
All electricians need a two-pole tester. The Fluke T90, T110, T130 and T150 two-pole voltage and continuity testers are rugged and easy- to- use. The designs offer a choice of functionality and user interface. The different models offer combinations of ...