T90 Voltage Indicator with RCD Trip Test Continuity Check CAT II 690 V, CAT III 600 V With RS Calibration

  • RS-stocknr. 749-2762
  • Fabrikantnummer FLUKE T90
  • Fabrikant Fluke
Datasheets
Wetgeving en conformiteit
Vrijgesteld
Land van herkomst: RO
Productomschrijving

Fluke T90/T110/T130/T150 Voltage and Continuity Testers

All electricians need a two-pole tester. The Fluke T90, T110, T130 and T150 two-pole voltage and continuity testers are rugged and easy- to- use. The designs offer a choice of functionality and user interface. The different models offer combinations of large buttons (convenient for use with gloved hands), bright backlights, clear audible and/or physical indicators (LEDs or vibration).
750-8438 FLUKE-T90 Voltage/Continuity Tester
750-8431 FLUKE-T110 Voltage/Continuity Tester with switchable load, vibration and built-in torch
750-8435 FLUKE-T130 Voltage/Continuity Tester with LCD, switchable load, vibration and built-in torch, display hold
750-8444 FLUKE-T150 Voltage/Continuity Tester with LCD, Ohms, switchable load, vibration and built-in torch, display hold

Features & Benefits

Rugged easy-to-operate two pole AC voltage and continuity testers
Handheld and lightweight
Ergonomic design, feels good in the hand
Unit cases heavy duty moulded
Probe protector
Thick test leads with wear indicators
Operates on 2 x AAA batteries (included)
Protected to IP54 (T90), IP64 (T110, T130, T150)
Dimensions 233 x 65 cm x 38 mm (T90), 260 x 70 x 38 mm (T110, T130, T150)
Weight 180 g (T90), 280 g (T110, T130, T150)

Supplied with

2 x AAA batteries, instruction sheet

Fluke Voltage and Continuity Tester

The Fluke 2-pole voltage and continuity tester measure voltage ranging between 12V and 690VAC/DC. This tester offers the best combination of safety, ease of use and fast answers available anywhere. It comes with probe storage accessory, push-on probe tips, batteries and instruction manual.

Features and Benefits

• 400kohm continuity test audible results with ON/OFF
• GS38 compliant tip caps
• LED indicators
• Detects voltage even when the batteries are discharged
• Probe protector
• Thick test leads with wear indicators
• Operates on 2xAAA batteries
• Improved probe docking system ensures that probes are protected when stored
• Push on probe tips reduce metal exposure between 4mm and 19mm WearGuard indicator shows damage to test leads
• CAT II 690V, CAT III 600V safety rating
• Low battery indicator
• Rugged and easy to operate
• Handheld and lightweight
• Ergonomic design
• Weight is 180g
• Operating temperature ranges between -15°C and 45°C

Applications


Electrical systems
• Industrial sites
• Commercial sites

Certifications


IP54 rated
• IEC EN 61243-3: 2010

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Specificaties
Kenmerk Waarde
Maximum Voltage 690V
Continuity Check Yes
Safety Category CAT II 690 V, CAT III 600 V
Display Type Digital
RCD Trip Test Yes
IP Rating IP54
Battery Type AAA
Calibrated RSCAL
Power Source Battery
Dimensions 230 x 65 x 38mm
Weight 180g
Height 38mm
Length 230mm
Maximum Operating Temperature +45°C
Model Number p T90
Minimum Operating Temperature -15°C
Safety Category Level CAT II, CAT III
Width 65mm
101 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
109,00
(excl. BTW)
131,89
(incl. BTW)
Aantal stuks
Per stuk
1 +
109,00 €
Related Products
RS Pro ICM 136R clamp meter. Utilising Hall ...
Description:
RS Pro ICM 136R clamp meter. Utilising Hall Effect technology and nickel steel alloy jaws for precise measurement of ac and dc current up to 600 A. Backlit 4000 Count LCD display with analogue bargraphTrue RMS Reading on ac mode600 ...
Clamp-on ammeters for data acquisition.Ergonomic, with 4000 count ...
Description:
Clamp-on ammeters for data acquisition.Ergonomic, with 4000 count display, to measure voltage and AC and DC currents.The hold function holds the measured value in difficult access or low-light conditions for analysis at a later time.Combines different functions:  multimeter, voltage and AC ...
The CM87 can measure AC / DC current ...
Description:
The CM87 can measure AC / DC current and can also measure AC / DC voltage plus testing procedures for resistance, capacitance, frequency, duty cycle, type K thermocouple temperature, continuity and diode. Large size clamp meter with 57mm jawsTrue RMS ...
TEK 402/404 are compact, versatile, battery powered instruments ...
Description:
TEK 402/404 are compact, versatile, battery powered instruments suitable for use in noisy environments. The tough construction makes it ideal for industrial and commercial environments including low voltage signalling, process control and training or educational applications. The loud 85 dB ...