Fluke PRV240FS Voltage Indicator Proving Unit LED

  • RS-stocknr. 146-2603
  • Fabrikantnummer PRV240FS
  • Fabrikant Fluke
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

Fluke PRV240FS Proving Unit for T6 Testers

The Fluke PRV240FS Proving Unit is a portable, pocket-sized, battery-powered voltage source. It is built to prove the functionality of the FieldSense measurement on the T6 test equipment. It also provides ac and dc voltages for other HiZ instruments in your tool box. The Fluke PRV240FS provides a safe method to verify that your T6 test equipment is operating properly before you conduct any live tests. The concept of “Test Before Touch” (TBT) involves testing your T6 against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement. Verify your test tool without unnecessary exposure to shock and arc flash. The PRV240FS reduces the need for personal protective equipment (PPE) when a known voltage source is not available. PPE is still needed for absence of voltage testing when appropriate. This unit is a simple-to-use solution for complying with TBT verification of your test tools.

Features and Benefits

• Unique • Compact
• Designed for safety and compliance
• PRV240FS reduces the risk of shock and arc flash
• Can prove functionality of the FieldSense measurement on the T6 test equipment
• Sources both ac and dc steady-state voltage supplies 240 V dc/ac
• A single switch and a set of LEDs indicate functionality of both the FieldSense “no-test-lead” voltage measurement capability, plus standard ac and dc measurements with test leads
• Compatible with high impedance multimeters or clamp meters
• Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, and through recessed contacts that are activated when test probes are inserted to avoid accidental contact
• Long battery life, 2000 tests per set of four AA batteries (10 second test average)

Supplied with

TPAK hanging strap, four AA batteries and instruction sheet

Mains Voltage Indicators - Contact

Specificaties
Kenmerk Waarde
Display Type LED
Battery Type AA
Power Source Battery
Dimensions 7.4 x 2.8 x 11.7mm
Weight 230g
Height 11.7mm
Length 7.4mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Model Number p PRV240FS
Width 2.8mm
13 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
164,00
(excl. BTW)
198,44
(incl. BTW)
Aantal stuks
Per stuk
1 +
164,00 €
Kalibratie-opties
Related Products
LED flashlight and non-contact voltage detector combined, Fluke ...
Description:
LED flashlight and non-contact voltage detector combined, Fluke presents the neat and compact Volt Light. When AC voltage has been detected the tester will glow blue, when the source has been detected the tester will glow red. Detected voltage and ...
Phase sequence indicator with electronic rotary disk, frequency ...
Description:
Phase sequence indicator with electronic rotary disk, frequency display and nominal voltage displayRotary field direction display by 6 optically rotating LEDs with colour switchingNominal supply voltage displayed by 3 LEDsNominal supply frequency displayed by 6 LEDsError indication: imbalance and missing ...
Martindale VIPDLOKPRO150 kit contains the VI-15000 690 V ...
Description:
Martindale VIPDLOKPRO150 kit contains the VI-15000 690 V voltage indicator, matching PD690 proving unit and the LOKKITPRO, ultimate lock out kit. The kit ensures you are never short of the right device to lock out safely, prove dead and achieve ...
The John Drummond test lamp and proving unit ...
Description:
The John Drummond test lamp and proving unit includes an MTL15 test lamp coupled with a PD690 proving unit and the TC69 combination carry case. Safe electrical work requires the use of a voltage indicator or test lamp that has ...