Monitran Vibration Sensor 8 mA -25°C → +120°C, Dimensions 22 x 48 mm

  • RS-stocknr. 533-2330
  • Fabrikantnummer MTN/1010
  • Fabrikant Monitran
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

MTN/1010 Low Cost General Purpose

Used for Data-collector, heavy industry, paper machinery
100mV/g +/-10% Nominal at 80Hz
Frequency from 2Hz up to 10KHz
+/-80G Dynamic acceleration range
Voltage bias nominal 12Vdc
TNC Connection
IP 65 Stainless Steel Body Case
Mounting torque: 8Nm
To use with Glue or M8 Mounting stud
Dimensions (D x L): 22x48mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specificaties
Kenmerk Waarde
Maximum Current 8 mA
Minimum Operating Temperature -25°C
Maximum Operating Temperature +120°C
Dimensions 22 x 48 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
205,39
(excl. BTW)
248,52
(incl. BTW)
Aantal stuks
Per stuk
1 +
205,39 €
Related Products
The Turck Banner range of Glass Fibre Optics ...
Description:
The Turck Banner range of Glass Fibre Optics are designed to solve challenging sensing applications even in the most hostile environments and can withstand severe shock or vibrations.This range of fibre optics are constructed from a combination of stainless steel, ...
High quality, low cost, non-contact Infra-red temperature sensors ...
Description:
High quality, low cost, non-contact Infra-red temperature sensors suitable for measuring the temperature of inaccessible or moving objects and materials. Fast response with high stability Types available with air/water cooled housings Quick and easy to install Available as either two-wire ...
High quality, low cost, non-contact Infra-red temperature sensors ...
Description:
High quality, low cost, non-contact Infra-red temperature sensors suitable for measuring the temperature of inaccessible or moving objects and materials. Fast response with high stability Types available with air/water cooled housings Quick and easy to install Available as either two-wire ...
Celduc PTA/PDC series M10 magnetic proximity sensors are ...
Description:
Celduc PTA/PDC series M10 magnetic proximity sensors are an extremely small package size. Featuring a normally open contact in a stainless steel housing. The PTA/PDC series comes pre cabled with a 2 wire 2 m length cable.