Murata Vibration Sensor -40°C → +80°C, Dimensions 3.8 x 2 x 1.05 mm

  • RS-stocknr. 124-5989
  • Fabrikantnummer PKGS-00GXP1-R
  • Fabrikant Murata
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

Shock Sensors, Murata

The range of shock sensors from Murata are designed for high performance acceleration sensors for vibration and mechanical shock. They are designed for a wide range of applications including; consumer equipment, healthcare, security, tyre pressure monitoring and industrial automation.

Shock Sensors, Murata

Specificaties
Kenmerk Waarde
Maximum Shock / Vibration 29400m/s²
Length 3.8mm
Width 2mm
Depth 1.05mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
Dimensions 3.8 x 2 x 1.05 mm
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 2)
1,275
(excl. BTW)
1,543
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
1,275 €
2,55 €
10 - 38
1,125 €
2,25 €
40 - 98
1,06 €
2,12 €
100 - 198
1,03 €
2,06 €
200 +
1,01 €
2,02 €
*prijsindicatie
Related Products
A range of passive infrared pyroelectric sensors from ...
Description:
A range of passive infrared pyroelectric sensors from Murata. The devices detect long-wavelength infrared radiation and are largely insensitive to visible light. Typical applications include burglar alarms, security systems and human presence detection. A range on suitable lenses for the ...
150 and 250mm versions, particularly suitable for industrial ...
Description:
150 and 250mm versions, particularly suitable for industrial use including, high pressure, high vacuum and high vibration applications. Tip Junction insulated from the sheath.Stainless steel (310)Temp range: probe 0 to + 1100°C, plug 220°C (max)Bendable for fitting in difficult access ...
Fully-electric vibration sensorThis innovative Seismic sensor detects break-in ...
Description:
Fully-electric vibration sensorThis innovative Seismic sensor detects break-in attempts through prying, penetration, impact etc. using typical impact sound signalsPatented frequency analysis detects the difference between simple knocking, external vibrations and similar frequencies that typically occur during a ...
Vibration sensors use solid-state piezoelectric accelerometers to detect ...
Description:
Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the ...