FTDI Chip FT-MOD-4232HUB, USB Serial Hub Module, USB 2.0 at 480MBps, 5 V, 36-Pin

  • RS-stocknr. 720-3736
  • Fabrikantnummer FT-MOD-4232HUB
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

USB Hi-Speed Serial/Hub Module

Designed to connect to FTDI’s V2DIPx modules, as well as any USB Host interface (e.g. PC) to expand the number of interfaces that can be accessed downstream from a Host
USB 2.0 Hi-Speed compatible
One standard Type A USB header to connect to the Host
USB Hi-Speed FT4232H device for USB-Serial/Bitbang communications. Entire USB protocol handled by USB module
USB 2.0 Hi-Speed hub controller integrated to support up to 3 downstream USB ports
USB hub controller and FT4232H are USB bus powered – no external power supply needed
External power input pin available to supply external downstream USB ports
Support for USB suspend and resume
4 Asynchronous serial interfaces available which include 2 independent MPSSE engines
Defaults to 4 RS-232 interfaces
Asynchronous Serial data transfer rates from 300 baud to 12 Mbaud at TTL levels
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
One dual-port USB A socket and 0.1 inch pitch header to support up to 3 downstream USB ports
Green/Amber status LED for downstream USB port 2&3
LED indicating power supply to external downstream USB ports
Onboard EEPROM 93LC56 for FT4232H configuration
UHCI / OHCI / EHCI host controller compatible

Specificaties
Kenmerk Waarde
Number of Transceivers 1
Data Rate 480Mbps
Protocols Supported USB 2.0
Power Supply Type Single
Typical Single Supply Voltage 5 V
Mounting Type Through Hole
Pin Count 36
Dimensions 75.04 x 23.37 x 19.9mm
Height 19.9mm
Length 75.04mm
Width 23.37mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26/05/2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each
32,91
(excl. BTW)
39,82
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
32,91 €
10 - 19
31,27 €
20 - 49
29,67 €
50 +
28,21 €
Related Products
The FT245B and FT245R are USB to parallel ...
Description:
The FT245B and FT245R are USB to parallel FIFO converter interfaces. Single chip USB to parallel FIFO bidirectional data transfer interfaceEntire USB protocol handled on the chip - No USB-specific firmware programming requiredFT245B USB compatibleFT245R USB 2.0 Full Speed compatibleFT245R ...
The FTDI Chips FT230XQ series is full speed ...
Description:
The FTDI Chips FT230XQ series is full speed USB to basic serial UART interface device. It has a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count. It ...
The FT220X and FT221X Full Speed USB 2.0 ...
Description:
The FT220X and FT221X Full Speed USB 2.0 ICs offer a compact bridge to 4-Bit SPI / FT1248 interfaces. The devices can acknowledge USB bus data, capable of operating up to 500 kbps, with low power consumption (8 mA). The ...
The FT240X, a Full Speed USB 2.0 IC ...
Description:
The FT240X, a Full Speed USB 2.0 IC offers a compact bridge to 8-bit wide FIFO interfaces. The device is a First-In First-Out (FIFO) data buffer, capable of operating up to 1 Mega Byte per second, with low power consumption ...