FTDI Chip FT245RL-TUBE, USB Controller, 1MBps, USB 2.0, 1.8 → 5.25 V, 28-Pin SSOP

  • RS-stocknr. 177-4859
  • Fabrikantnummer FT245RL-TUBE
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

FT245B, FT245R, USB to FIFO Converters, FTDI Chip

The FT245B and FT245R are USB to parallel FIFO converter interfaces.

Single chip USB to parallel FIFO bidirectional data transfer interface
Entire USB protocol handled on the chip - No USB-specific firmware programming required
FT245B USB compatible
FT245R USB 2.0 Full Speed compatible
FT245R with the FTDIChip-ID security dongle feature

Specificaties
Kenmerk Waarde
Number of Transceivers 1
Data Rate 1Mbps
Protocols Supported USB 2.0
Power Supply Type Single
Typical Single Supply Voltage 1.8 → 5.25 V
Mounting Type Surface Mount
Package Type SSOP
Pin Count 28
Dimensions 10.2 x 5.3 x 1.75mm
Height 1.75mm
Length 10.2mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 5.3mm
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each (In a Tube of 47)
3,421
(excl. BTW)
4,139
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
47 - 188
3,421 €
160,787 €
235 - 423
3,147 €
147,909 €
470 - 1128
2,895 €
136,065 €
1175 - 2303
2,763 €
129,861 €
2350 +
2,694 €
126,618 €
*prijsindicatie
Related Products
The FTDI Chips FT230XQ series is full speed ...
Description:
The FTDI Chips FT230XQ series is full speed USB to basic serial UART interface device. It has a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count. It ...
The FTDI Chips FT232HL series is single channel ...
Description:
The FTDI Chips FT232HL series is single channel high speed USB to multipurpose UART/FIFO IC. It has UART transfer data rate up to 12Mbaud. It supports self powered, bus powered USB configurations. It has 48 pin LQFP package. Industrial operating ...
The MCP2221 is a USB-to-UART/I2C serial converter which ...
Description:
The MCP2221 is a USB-to-UART/I2C serial converter which enables USB connectivity in applications that have a UART and I2C interfaces. The device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. The MCP2221 ...
Cypress’s EZ-USB FX3S is the next-generation USB 3.0 ...
Description:
Cypress’s EZ-USB FX3S is the next-generation USB 3.0 peripheral controller, providing integrated and flexible features. FX3S has a fully configurable, parallel, general programmable interface called GPIF II, which can connect to any processor, ASIC, or FPGA. GPIF II is an ...