USB to serial TTL level UART FT232RL

  • RS-stocknr. 146-0649
  • Fabrikantnummer FT232RL
  • Fabrikant FTDI Chip
Wetgeving en conformiteit

FT232R - USB to Serial UART with Clock Generator, FTDI Chip

The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.

A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website.

The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.

Features & Benefits

• Single chip USB to asynchronous serial data transfer interface.
• Entire USB protocol handled on the chip. No USB-specific firmware programming required.
• Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration.
• Fully integrated USB termination resistors.
• Fully integrated clock generation with no external crystal required plus optional clock output
• Data transfer rates from 300 Baud to 3 MBaud (RS422, RS485, RS232) at TTL levels.
• 128 B receive buffer and 256 B transmit buffer utilising buffer smoothing technology to allow for high data throughput


USB Industrial Control
USB bar code readers
USB Digital camera interface
USB wireless modems
PDA to USB Transfers
USB Card readers
USB FLASH card readers and writers
USB Audio and low bandwidth video data transfer

Kenmerk Waarde
Mounting Type Surface Mount
Package Type SSOP
Pin Count 28
Dimensions 10.2 x 5.3 x 1.75mm
Height 1.75mm
Length 10.2mm
Maximum Operating Temperature +85 °C
Width 5.3mm
Minimum Operating Temperature -40 °C
46000 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (On a Reel of 2000)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
2000 - 2000
2,497 €
4.994,00 €
4000 - 4000
2,372 €
4.744,00 €
6000 - 8000
2,234 €
4.468,00 €
10000 +
2,196 €
4.392,00 €
Related Products
Compatible with 4mA Input Drivers or Larger100Mbps Guaranteed ...
Compatible with 4mA Input Drivers or Larger100Mbps Guaranteed Data RateSix Bidirectional ChannelsClock Return Output (MAX13035E)Enable Input (MAX13030E–MAX13034E)±15kV ESD Protection on I/O VCC Lines+1.62V ≤ VL ≤ +3.2V and +2.2V ≤ VCC ≤ +3.6V Supply Voltage RangeLead-Free, 16-Bump UCSP (2mm x ...
Microchip's USB251xB is a family of versatile, cost-effective, ...
Microchip's USB251xB is a family of versatile, cost-effective, and power-efficient USB 2.0 hub controllers. Leveraging Microchip's innovative MultiTRAK™ technology that delivers industry-leading data throughput in mixed-speed USB environments, the USB251xB family is a USB port expansion solution for applications ...
Universal serial bus (USB) integrationHigh-speed On-The-Go (HS-OTG) host ...
Universal serial bus (USB) integrationHigh-speed On-The-Go (HS-OTG) host and peripheral compliant with OTG Supplement Version 2.0Thirty-two physical endpointsGeneral Programmable Interface (GPIF™ II)Programmable 100-MHz GPIF II enables connectivity to a wide range of external devices8-, 16-, 24-, and 32-bit data ...
Cypress’s EZ-USB FX3S is the next-generation USB 3.0 ...
Cypress’s EZ-USB FX3S is the next-generation USB 3.0 peripheral controller, providing integrated and flexible features. FX3S has a fully configurable, parallel, general programmable interface called GPIF II, which can connect to any processor, ASIC, or FPGA. GPIF II is an ...