FTDI Chip FT232RL USB to Serial UART 3MBd, 28-Pin, SSOP

  • RS-stocknr. 406-580
  • Fabrikantnummer FT232RL
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

FT232R - USB to Serial UART with Clock Generator, FTDI Chip

The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.

A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com

The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.

Features & Benefits

• Single chip USB to asynchronous serial data transfer interface.
• Entire USB protocol handled on the chip. No USB-specific firmware programming required.
• Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration.
• Fully integrated USB termination resistors.
• Fully integrated clock generation with no external crystal required plus optional clock output
• Data transfer rates from 300 Baud to 3 MBaud (RS422, RS485, RS232) at TTL levels.
• 128 B receive buffer and 256 B transmit buffer utilising buffer smoothing technology to allow for high data throughput

Applications

USB Industrial Control
USB bar code readers
USB Digital camera interface
USB wireless modems
PDA to USB Transfers
USB Card readers
USB FLASH card readers and writers
USB Audio and low bandwidth video data transfer

Specificaties
Kenmerk Waarde
Number of Channels per Chip 1
Transmit FIFO 128B
Receive FIFO 256B
Maximum Data Rate 3MBd
Mounting Type Surface Mount
Package Type SSOP
Pin Count 28
Dimensions 10.2 x 5.3 x 1.75mm
Length 10.2mm
Width 5.3mm
Height 1.75mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
640 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3828 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,96
(excl. BTW)
4,79
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
3,96 €
20 - 99
3,38 €
100 - 499
3,20 €
500 - 999
2,49 €
1000 +
2,32 €
Verpakkingsopties
Related Products
This small Bluetooth dongle is a great addition ...
Description:
This small Bluetooth dongle is a great addition to any SBC (Single Board Computer). Included with this smart Bluetooth dongle is a free development kit that provides you great information on how to produce your own LE applications through a ...
The Keysight Technologies 64-channel USB data acquisition has ...
Description:
The Keysight Technologies 64-channel USB data acquisition has 250ksps sampling rate. The analogue output being able to send out predefined or arbitrary waveforms make this a good tool when closed-loop feedback or stimulus is required. The digital I/O channels allow ...
High input/output voltage range meets demanding requirements for ...
Description:
High input/output voltage range meets demanding requirements for industrial applications such as driving relays and actuators. Limit applications include industrial control and automation, isolated data communication, logic level interface and laboratory automation. All models are highly reliable and excellent ...
Amphenol MUSB series USB connectors provide the ideal ...
Description:
Amphenol MUSB series USB connectors provide the ideal solution for data transfer in harsh environments that demand a robust and reliable connector . These USB connectors are underwater submersible rather than just water resistant in both mated and unmated conditions. ...