Siemens SITOP DC UPS Uninterruptible Power Supply, 23.3 → 24.7V dc Output, 168W, 7A

  • RS-stocknr. 668-0545
  • Fabrikantnummer 6EP1933-2NC01
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

SITOP DC UPS with Capacitors

SITOP 24 V power supplies can be expanded with a SITOP UPS500 for bridging short-term power failures in the order of minutes. The high capacity double-layer capacitors supply enough energy to back up the PC operation and application data and to shut down software applications. You can increase the buffer times using SITOP PSU501S expansion modules (up to 3).
The IP65 version SITOP UPS500P in long metal housing is ideally suited to distributed use.

Features and Benefits

• 24 V buffering for a few minutes to allow data to be backed up and applications to be closed. • Maintenance free
• Long lifetime, even at high temperatures
• High ambient temperatures up to +60 °C
• Short charging times
• No ventilation is required since no gas is emitted
• Distributed applications possible without control cabinet
• Software tool, free of charge, for easy configuring and integrating in PC-based systems

Product Application Information

The high-capacitance double-layer capacitors bridge power failures for a few minutes. The time is normally sufficient, for example, for the safe shutdown of PC-based automation systems. The USB interface and a free software tool enable easy communication with the PC.

The capacitors have a long life even at high temperature, and can be used at ambient temperatures of up to 60°C. SITOP UPS500P in IP65 degree of protection can also be installed outside the control cabinet in a distributed configuration.

Approvals

CE, cULus, ATEX, cCSAus Class I Div 2, GL, ABS, CB

Eaton UPS Uninterruptible Power Supplies - 5P650i

• The type of technology - line-interactive high frequency (pure sinewave, booster + fader)
• Configuration type is – tower
• 650/420 rating (va/watts)
• The dimensions of the 5P 650i VA Tower is 230 x 150 x 345 mm
• IEC-320-C14 connection type (input)
• Audible noise is smaller than 40 dBA

Specificaties
Kenmerk Waarde
Model SITOP UPS500P
Power Rating 168W
Output Voltage 23.3 → 24.7V dc
Input Voltage 22.5 → 29V dc
Mounting Type DIN Rail
Number of Outlets 1
Type Switch Mode
Current Rating 7A
Length 80mm
Width 400mm
Depth 80mm
5 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
599,40
(excl. BTW)
725,27
(incl. BTW)
Aantal stuks
Per stuk
1 +
599,40 €
Related Products
The Riello Dialog Vision 2000VA line interactive UPS ...
Description:
The Riello Dialog Vision 2000VA line interactive UPS DVT (tower) has a power share output socket that provides load shedding of the least critical load to maximize the backup time of the most critical servers. It uses sinewave digital technology. ...
The PULS uninterruptible power supply (UPS) controller UB10.241 ...
Description:
The PULS uninterruptible power supply (UPS) controller UB10.241 is an addition to standard 24V power supplies to bridge power failures or voltage fluctuations. This device avoids expensive downtimes, long restart cycles, and loss of data. The DC-UPS includes a professional ...
Description:
A IP20 UPS with an output voltage of 12 Vdc, a nominal output current of 4A and an impressive typical response time of 100ms. • Fast installation• Good reliability• Pluggable COMBICON screw connections• Horizontal DIN rail NS 35, EN 60715 ...
A IP20 UPS with an output voltage of ...
Description:
A IP20 UPS with an output voltage of 24 Vdc, a nominal output current of 2A and an impressive typical response time of 100ms. • Fast installation• Good reliability• Pluggable COMBICON screw connections• Horizontal DIN rail NS 35, EN 60715 ...