Eaton UPS Source Transfer Switch

  • RS-stocknr. 918-6443
  • Fabrikantnummer EATS16
  • Fabrikant Eaton
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

Eaton ATS

The Eaton Automatic Transfer Switch (ATS) is a high availability switch designed for providing redundant power for sensitive equipment. Powered by two independent power sources and automatically makes a rapid switch from one source to the other when the power supply used to power its connected load fails.
This ATS is efficient and reliable

Provides power redundancy to IT equipment
Alternative to expensive redundant power supplies available from networking equipment vendors
Compact, 1U rack form factor
Seamlessly switches from one power source to the other
Network management on ATS 16 Netpack versions
LCD with metering and basic configuration capabilities
Input Plug: (2) C20
Outputs: (8) C13, (1) C19

The ATS 16 Netpack provides network connectivity. This allows users to access, configure and manage units from remote locations

Supplied with

User manual
Quick start guide
Safety manual printed
2 x Input cables: C19-C20
2 x Input cable lockers
Plastic strips for output locking
RS232 cable
DB9/RJ45 serial cable for NMC card (RS 918-6447)
Accessories for rack installation

Eaton Power Source Transfer Switch

Specificaties
Kenmerk Waarde
Dimensions 430 x 250 x 43mm
Depth 43mm
Length 430mm
Width 250mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 08/06/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
866,08
(excl. BTW)
1.047,96
(incl. BTW)
Aantal stuks
Per stuk
1 +
866,08 €
Related Products
Opto 2 click is a galvanic isolator Click ...
Description:
Opto 2 click is a galvanic isolator Click board™, used to provide an optical isolation of sensitive microcontroller (MCU) pins, when operated by external signals. TLP2770 opto-isolation elements (optocouplers) can be driven with a very low current, down to 1.3mA ...
Position Sensorless BLDC Drivers (no Hall Sensor required)180° ...
Description:
Position Sensorless BLDC Drivers (no Hall Sensor required)180° Sinusoidal Drive for High Efficiency and Low Acoustic NoiseSupports 2V to 14V Power SuppliesSpeed Control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)Built-In Frequency Generator (FG output signal)Built-In Lock-Up ...
The Ha-VIS eCon 3000 Full Gigabit family of ...
Description:
The Ha-VIS eCon 3000 Full Gigabit family of unmanaged Ethernet switches is equipped with up to 7 Gigabit Ethernet ports. It allows for cost-efficient and quick expansion and/or reconstruction of network infrastructures with high-bandwidth requirements.The slender design of the switches ...
The CL1000 single rail LCD KVM console that ...
Description:
The CL1000 single rail LCD KVM console that serves as the front end for standard KVM switches. The CL1000 integrated 17" LED-backlit LCD panel, full keyboard, and touchpad in a 1U, rack-mountable, Slideaway housing. • LED illumination light• Integrated KVM ...