RS PRO Universal Joint, Single, Needle Roller, Bore 12mm, 56mm Length

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Single Universal Joint with Needle Roller Bearing

Carbon steel universal joints for connecting equipment where there is a misalignment greater than 5 degrees up to an angle of 45 degrees. Fitted with needle bearings lubricated for a lifetime and requiring no maintenance, suitable for applications with speeds of up to 4000 rpm. Smooth and silent operation, suitable applications include connection of conveyers, line shafts and drive shafts.

Specificaties
Kenmerk Waarde
Number of Joints Single
Joint Type Needle Roller
Hub Type Bored Hub
Bore 12mm
Hub Outer Diameter 25mm
Overall Length 56mm
Maximum Working Angle 45°
Peak Torque 200Nm
Material Steel
Maximum Speed 4000rpm
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
51,36
(excl. BTW)
62,15
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
51,36 €
5 - 9
49,76 €
10 +
48,16 €
Related Products
A comprehensive range of light duty universal joints ...
Description:
A comprehensive range of light duty universal joints manufactured in non-ferrous metals and Acetal, with a -40 to 85°C operating range. Corrosion resistant constructionFreedom from backlashNo lubrication requiredElectrical isolation between shaftsAvailable with metric or imperial bore sizes at both ends, ...
Extremely versatile couplings specified in industries as diverse ...
Description:
Extremely versatile couplings specified in industries as diverse as robotics and aerospaceMaximum speed 500rpm.
Universal joints for connecting a wide range of ...
Description:
Universal joints for connecting a wide range of equipment where there is a misalignment greater than 5°. Suitable for connecting line shafts, drive shafts, conveyors and most types of rotating machinery to a prime mover. These plain bearing universal couplings ...
Carbon steel universal joints for connecting equipment where ...
Description:
Carbon steel universal joints for connecting equipment where there is a misalignment greater than 5 degrees up to an angle of 90 degrees. These universal joints are constructed using wear resistant sliding bushes, suitable for applications with speeds of up ...