QM-3/8-3/8 sleeve

  • RS-stocknr. 202-3036
  • Fabrikantnummer QM-3/8-3/8
  • Fabrikant Festo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IN
Productomschrijving

The Festo one-way flow control function for exhaust air has a threaded mounting type and can be assembled in any position. Here, threaded plug is made of wrought aluminium alloy material with a brass adjusting screw. Its pneumatic connection port 1 value

Ambient temperature -10 to 60 °C
Knurled screw adjusting element

Specificaties
Kenmerk Waarde
Manufacturer Series QM
Tube Size 3/8
Material Aluminium Alloy
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 19/10/2020, met een levertijd van 1 werkdag.
Prijs 1 Bag of 10
26,00
(excl. BTW)
31,46
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
26,00 €
2,60 €
*prijsindicatie
Related Products
The Festo Service unit combination with MINI-KB output ...
Description:
The Festo Service unit combination with MINI-KB output pressure max. is 7 bar and its width is 88mm. It used manual actuator and used PA-reinforced for housing material. Ambient temperature -5 to 50 °C.
The Festo on-off valve of MS series has ...
Description:
The Festo on-off valve of MS series has manual actuator with silencer and it gives direction from left to right. Its size is 9 and used piston slide of structure. It standard nominal flow rate is 18,000 l/min. Ambient temperature ...
The Festo flow control valve function only work ...
Description:
The Festo flow control valve function only work in one direction which use wrought aluminium alloy housing material for nut. Its pneumatic connection port 1 value is M5 with nominal size is 2mm. Ambient temperature -20 to 60 °CKnurled screw ...
The Festo silencer used for reducing noise and ...
Description:
The Festo silencer used for reducing noise and avoiding contamination at the exhaust port of pneumatic component. It assembled in any position and operating pressure complete temperature range 0 - 10 bar. Its flow rate to atmosphere is 6000 l/min. ...