Block N87 EFD 20 Ferrite Core Transformer, 1200nH, 20 x 7 x 10mm, For Use With Choke Converter Topologies, Transmitter

  • RS-stocknr. 840-7733
  • Fabrikantnummer FS-1EFD-2007-10
  • Fabrikant Block
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Block FS-1EFD Series Size 20/10/7 Ferrite Transformer Cores

FS-1EFD series size 13/7/4 ferrite transformer cores made from N87. These EFD low profile type ferrite transformer cores are available with air gaps inserted:
Stock number 840-7480 has a 0.1mm gap
Stock number 840-7563 has a 0.2mm gap
Stock number 840-7561 has a 0.5mm gap
Stock number 840-7733 has a 1.0mm gap
Typical applications for these ferrite cores include transformers and inductors in switch mode power supplies
For bobbins see stock numbers 840-7317 and 840-7311

Transformer Ferrite Kits - Cores

The AL value in the table applies to a core set consisting of two cores without air gap Cores ETD conform to IEC 51(CO)276

Specificaties
Kenmerk Waarde
Accessory Type EFD 20
For Use With Choke Converter Topologies, Transmitter
Dimensions 20 x 7 x 10mm
AL Rating 1200nH
Material N87
Depth 10mm
Length 20mm
Width 7mm
198 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
0,45
(excl. BTW)
0,54
(incl. BTW)
Aantal stuks
Per stuk
1 +
0,45 €
Related Products
WE-LAN transformers from Wurth Elektronik are designed for ...
Description:
WE-LAN transformers from Wurth Elektronik are designed for Ethernet and PoE (Power over Ethernet) applications. Other suitable applications included 1 Gbit Ethernet, Hub, Router and Switches. WE-LAN transformers are compliant with most ICs for Ethernet applications such as AMD, Globespan, ...
Isolation converter transformer, low profile, with maximum isolation ...
Description:
Isolation converter transformer, low profile, with maximum isolation voltage of 1500VrmsSpecifically designed to provide isolated RS-232 interface, see Maxim integrated circuit MAX251 (stock no. 540-2142)Printed circuit board standard pinout (2·54mm).
EPCOS PQ Ferrite cores have optimised round leg ...
Description:
EPCOS PQ Ferrite cores have optimised round leg and wider outer surface to conventional cores. The round leg on these ferrite cores reduces winding length and the wider surface area lowers the thermal resistance by offering a larger area for ...
EPCOS U cores are of rectangular cross section ...
Description:
EPCOS U cores are of rectangular cross section and I Cores are made of SIFERRIT Materials N27 and N87. Owing to their high saturation flux density, high curie temperature and low dissapation losses they are suitable for power, pulse and ...