- RS-stocknr.:
- 454-0574
- Fabrikantnummer:
- NT21ST121E
- Fabrikant:
- Omron
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 454-0574
- Fabrikantnummer:
- NT21ST121E
- Fabrikant:
- Omron
Wetgeving en conformiteit
N.v.t.
Productomschrijving
Omron Touch-Screen HMI Display
The Omron 5.2inch touch screen HMI display is a panel-mounted device with responsive touch screens for operator input. It is the latest development for small touch screen operator interfaces. This touch screen has many more features and functions but can remain compatible with the former screen by changing to NT20S mode.
Note
2m programming cable (216-4667) may be used with this panel.
Note
2m programming cable (216-4667) may be used with this panel.
Features and Benefits
• Two RS-232C ports in the NT21 (compared with one in the NT20S) enable simultaneous connection of a PLC, bar code reader, and NT support tool (connectable to serial port A only)
• With 512Kb of memory capacity, there is more than ample space for storing screen data
• In addition to the host link and 1:1 NT link communications, the NT21 supports high-speed 1:N NT links and memory link communications
• An alarm message can be displayed in response to PLC bit status and the content along with time of the message can be stored as an alarm history
• The NT21 is equipped with many of the same functions as the SYSMAC PLC programming console
• I/O comments in the I/O tables of the CX-programmer can be used directly
• Import bit map image
• Trend graph with on-board memory, analogue meter, and recipe functions
• Pop-up key pads for alphanumeric entry
• PLC programming console function and supports all current programmable controllers
• Resolution: 260x140pixels
• With 512Kb of memory capacity, there is more than ample space for storing screen data
• In addition to the host link and 1:1 NT link communications, the NT21 supports high-speed 1:N NT links and memory link communications
• An alarm message can be displayed in response to PLC bit status and the content along with time of the message can be stored as an alarm history
• The NT21 is equipped with many of the same functions as the SYSMAC PLC programming console
• I/O comments in the I/O tables of the CX-programmer can be used directly
• Import bit map image
• Trend graph with on-board memory, analogue meter, and recipe functions
• Pop-up key pads for alphanumeric entry
• PLC programming console function and supports all current programmable controllers
• Resolution: 260x140pixels
Applications
• Automation
• Control panels
• Manufacturing industry
• Control panels
• Manufacturing industry
Certifications
• UL approved
• cULus approved
• IP65 rated
• cULus approved
• IP65 rated
Specificaties
Kenmerk | Waarde |
---|---|
Manufacturer Series | NT21 |
Display Type | LCD |
Manufacturer Part No. | NT21ST121E |
Display Resolution | 260 x 140pixels |
Port Type | RS232 |
Onboard Memory | 512 kB |
Backlighting | Yes |
Supply Voltage | 24 V dc |
Display Colour | Monochrome |
Width | 110mm |
Length | 190mm |
Depth | 53.5mm |
Dimensions | 190 x 110 x 53.5 mm |
Maximum Operating Temperature | +50°C |
Minimum Operating Temperature | 0°C |