BU21026MUV-E2, Resistive Touch Screen Controller, 12 bit 2-Wire, 20-Pin VQFN020V4040

  • RS-stocknr. 185-1347
  • Fabrikantnummer BU21026MUV-E2
  • Fabrikant ROHM
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

BU21026MUV is a low power 4-wire resistive touch screen controller. BU21026MUV measures coordinates and touch pressures with a 12bit A/D converter. BU21026MUV has a digital filter for noise reduction.

4-wire resistive touch screen controller
Single 1.65V to 3.60V supply.
Low standby current (0.8μA max)
12bit SAR A/D converter
2-wire serial interface
Command base interface
Digital filter
Touch pressure measurement
Auto power down control
Built-in clock oscillation circuit

Specificaties
Kenmerk Waarde
Resolution 12 bit
Sensing Technology Resistive
Sensing Wire Type 2-Wire
Mounting Type Surface Mount
Package Type VQFN020V4040
Pin Count 20
Typical Operating Supply Voltage 3 V
Dimensions 4 x 4 x 1mm
Length 4mm
Width 4mm
Height 1mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -30 °C
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each (In a Pack of 5)
1,194
(excl. BTW)
1,445
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
1,194 €
5,97 €
25 - 95
1,11 €
5,55 €
100 - 245
1,05 €
5,25 €
250 +
0,976 €
4,88 €
*prijsindicatie
Related Products
The MTCH102, MTCH105 and MTCH108 devices from Microchip ...
Description:
The MTCH102, MTCH105 and MTCH108 devices from Microchip are Capacitive Touch/Proximity Controller ICs that convert touch or proximity detection into a simple digital output. The sensitivity level of the controller is configurable and a low-power mode included, allowing for easy ...
A range of Programmable System-on-chip (PSoC®) products from ...
Description:
A range of Programmable System-on-chip (PSoC®) products from Cypress Semiconductor incorporating analogue sub-systems with capacitive sensing hardware. These configurable devices include an on-board MCU and are aimed primarily at capacitive touch screen applications.
The MTCH105 is a 5 channels Proximity/Touch controller ...
Description:
The MTCH105 is a 5 channels Proximity/Touch controller with 5 simple digital outputs. The sensitivity and power mode can be configured. The MTCH105 device uses an advanced optimization algorithm to actively suppress noise from the signal to achieve reliable proximity/touch ...
The Microchip mTouch™ AR1000 Series Resistive Touch Screen ...
Description:
The Microchip mTouch™ AR1000 Series Resistive Touch Screen Controller is a complete, easy to integrate, cost-effective and universal touch screen controller chip solution. Additional Features: Supports any manufacturer's 4-, 5-, or 8-wire analog resistive touch screen I2C or SPI communication1024x1024 ...