MTCH105-I/ML, Capacitive Touch Controller IC, 16-Pin QFN

  • RS-stocknr. 177-0487
  • Fabrikantnummer MTCH105-I/ML
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The MTCH105 is a 5 channels Proximity/Touch controller with 5 simple digital outputs. The sensitivity and power mode can be configured. The MTCH105 device uses an advanced optimization algorithm to actively suppress noise from the signal to achieve reliable proximity/touch detection.

High Signal to Noise Ration (SNR)
Moisture/ Water resistance
Simple I/O interface with existing system
Adjustable Sensitivity with compensation for different sensor sizes
Multi Stage Active noise suppression filters
Automatic Environmental compensation
High Signal to Noise Ration (SNR)
Moisture/ Water resistance
Simple I/O interface with existing system
Adjustable Sensitivity with compensation for different sensor sizes
Multi Stage Active noise suppression filters
Automatic Environmental compensation
Support for wide range of sensor shape and size

Specificaties
Kenmerk Waarde
Sensing Technology Capacitive
Mounting Type Surface Mount
Package Type QFN
Pin Count 16
Typical Operating Supply Voltage 3.6 V
Dimensions 4 x 4 x 0.95mm
Length 4mm
Width 4mm
Height 0.95mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The ADuCM350 device is a 16-bit precision, low-power ...
Description:
The ADuCM350 device is a 16-bit precision, low-power meter-on-a-chip based on an ARM Cortex-M3 processor core. The ADuCM350 is designed with high-precision current, voltage and impedance measurement capabilities. It can be powered by a single coin-cell making it suitable for ...
The MCP466X devices are dual channel, non-volatile, 8-bit ...
Description:
The MCP466X devices are dual channel, non-volatile, 8-bit (257 wiper steps) digital potentiometers with EEPROM and an I2C compatible interface. The MCP466X family is available with end-to-end resistor values of 5KΩ, 10KΩ, 50kΩ and 100KΩ. These devices offer WiperLock™ Technology ...
A range of Programmable System-on-chip (PSoC®) products from ...
Description:
A range of Programmable System-on-chip (PSoC®) products from Cypress Semiconductor incorporating analogue sub-systems with capacitive sensing hardware. These configurable devices include an on-board MCU and are aimed primarily at capacitive touch screen applications.
The BU21024FV-M is 4-wire resistive touch screen controller ...
Description:
The BU21024FV-M is 4-wire resistive touch screen controller IC. 4-wire resistive touch screen interface3.0V single power supply4-wire SPI interface / 2-wire serial interfaceSelectable download way of CPU firmware (Host or EEPROM)Two points and gesture detection.