CY8CTMG120-56LTXI, Capacitive Touch Screen Controller Serial-I2C 2-Wire, 56-Pin QFN

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

CapSense® Touch Controllers, Cypress Semiconductor

A range of Programmable System-on-chip (PSoC®) products from Cypress Semiconductor incorporating analogue sub-systems with capacitive sensing hardware. These configurable devices include an on-board MCU and are aimed primarily at capacitive touch screen applications.

Touch Screen Controllers

Specificaties
Kenmerk Waarde
Interface Type Serial-I2C
Sensing Technology Capacitive
Sensing Wire Type 2-Wire
Mounting Type Surface Mount
Package Type QFN
Pin Count 56
Typical Operating Supply Voltage 3 → 5.25 V
Dimensions 8.1 x 8.1 x 0.95mm
Length 8.1mm
Width 8.1mm
Height 0.95mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
3,17
(excl. BTW)
3,84
(incl. BTW)
Aantal stuks
Per stuk
1 +
3,17 €
Verpakkingsopties
Related Products
The MTCH105 is a 5 channels Proximity/Touch controller ...
Description:
The MTCH105 is a 5 channels Proximity/Touch controller with 5 simple digital outputs. The sensitivity and power mode can be configured. The MTCH105 device uses an advanced optimization algorithm to actively suppress noise from the signal to achieve reliable proximity/touch ...
The Microchip mTouch™ AR1000 Series Resistive Touch Screen ...
Description:
The Microchip mTouch™ AR1000 Series Resistive Touch Screen Controller is a complete, easy to integrate, cost-effective and universal touch screen controller chip solution. Additional Features: Supports any manufacturer's 4-, 5-, or 8-wire analog resistive touch screen I2C or SPI communication1024x1024 ...
The BU21024FV-M is 4-wire resistive touch screen controller ...
Description:
The BU21024FV-M is 4-wire resistive touch screen controller IC. 4-wire resistive touch screen interface3.0V single power supply4-wire SPI interface / 2-wire serial interfaceSelectable download way of CPU firmware (Host or EEPROM)Two points and gesture detection.
BU21026MUV is a low power 4-wire resistive touch ...
Description:
BU21026MUV is a low power 4-wire resistive touch screen controller. BU21026MUV measures coordinates and touch pressures with a 12bit A/D converter. BU21026MUV has a digital filter for noise reduction. 4-wire resistive touch screen controllerSingle 1.65V to 3.60V supply.Low standby current ...