MHH Engineering Dial Measuring Hex Torque Screwdriver, 0.2 → 1Nm, 1/4 in Drive, ±6 % Accuracy - RS Calibrated
- RS-stocknr.:
- 668-1646
- Fabrikantnummer:
- 017500
- Fabrikant:
- MHH Engineering
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 668-1646
- Fabrikantnummer:
- 017500
- Fabrikant:
- MHH Engineering
Wetgeving en conformiteit
Niet conform
- Land van herkomst:
- GB
Productomschrijving
Dial Measuring Drivers
Stainless steel shafts, aluminium handles and glass filled nylon dials
Flat torsion spring mechanism gives best linear characteristics in both directions
Feature dual ISO / Imperial dials
" Female Hexagon Drive to suit screwdriver bits
Can be used in either track mode, where the pointer tracks the applied torque, or in memory mode, where the pointer remains at the maximum torque applied
Mode is easily changed by withdrawing slider and resetting the bezel ring
Suitable for Quality Control and Research and Development, also assembly operations for example electronics, electrical etc.
Flat torsion spring mechanism gives best linear characteristics in both directions
Feature dual ISO / Imperial dials
" Female Hexagon Drive to suit screwdriver bits
Can be used in either track mode, where the pointer tracks the applied torque, or in memory mode, where the pointer remains at the maximum torque applied
Mode is easily changed by withdrawing slider and resetting the bezel ring
Suitable for Quality Control and Research and Development, also assembly operations for example electronics, electrical etc.
Note
These Drivers must be pre-set using a suitable Torque Analyser. See Analyser range for details.
Specificaties
Kenmerk | Waarde |
|---|---|
| Torque Range | 0.2 → 1Nm |
| Type | Dial Measuring |
| Drive Shape | Hex |
| Drive Size | 1/4 in |
| Overall Length | 178 mm |
| Accuracy | ±6 % |
| Blade Material | Stainless Steel |
| Calibrated | RSCAL |