- RS-stocknr.:
- 734-7145P
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 734-7145P
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
Productomschrijving
RS PRO SPDT Toggle Switch, On-Off-(On), Panel Mount
Use this single pole double throw (SPDT) toggle switch to energise two different circuits at once using one energy source. Part of our RS PRO range, this tried-and-tested miniature version boasts low contact resistance. For added convenience, it can be panel mounted.
Featuring a chromium-plated brass actuator, this durable stainless steel ON-OFF-ON switch comes with silver-plated contacts. It benefits from being lead-free, too. The toggle has a contact current rating of 5 A and a contact resistance of 10 mΩ. Plus, it doesn't require continuous compression while it's being latched.
Switches similar to this one are often found allowing or cutting off electrical currents. They can be used for any automation or electrical application. We offer a variety of related components, such as panel mounts, plating panels and toggle switch boots.
Featuring a chromium-plated brass actuator, this durable stainless steel ON-OFF-ON switch comes with silver-plated contacts. It benefits from being lead-free, too. The toggle has a contact current rating of 5 A and a contact resistance of 10 mΩ. Plus, it doesn't require continuous compression while it's being latched.
Switches similar to this one are often found allowing or cutting off electrical currents. They can be used for any automation or electrical application. We offer a variety of related components, such as panel mounts, plating panels and toggle switch boots.
Features and Benefits
SPDT latching, miniature toggle switch
Panel-mount with solder type terminal
Contact resistance of 10 mΩ
Silver-plated brass contact material
Panel cut out size of 6.35 mm
Operating temperature range of -30°C to +85°C
Chromium-plated brass actuator material
Mechanical life of 40000 cycles
Actuator length of 10.41 mm
Contact current rating of 5 A @ 250 V AC
On-Off-(On) switch operation
Lead-free
RoHS (Restriction of Hazardous Substances) compliant
Panel-mount with solder type terminal
Contact resistance of 10 mΩ
Silver-plated brass contact material
Panel cut out size of 6.35 mm
Operating temperature range of -30°C to +85°C
Chromium-plated brass actuator material
Mechanical life of 40000 cycles
Actuator length of 10.41 mm
Contact current rating of 5 A @ 250 V AC
On-Off-(On) switch operation
Lead-free
RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specificaties
Kenmerk | Waarde |
---|---|
Contact Configuration | SPDT |
Switch Operation | On-Off-(On) |
Contact Current Rating | 5 A @ 250 V ac |
Mounting Type | Panel Mount |
Terminal Type | Solder |
Panel Cut Out Diameter | 6.35mm |
Actuator Length | 10.41mm |
Actuator Material | Chromium Plated Brass |
Contact Material | Silver Plated Brass |
Panel Cut Out Size | 6.35mm |
Contact Resistance | 0.01Ω |
Maximum Operating Temperature | +85°C |
Mechanical Life | 40000Cycles |
Operating Temperature Range | -30 → +85°C |
Standards Met | RoHS & Lead Free |
Minimum Operating Temperature | -30°C |