APEM Single Pole Single Throw (SPST) Toggle Switch, Latching, Panel Mount

  • RS-stocknr. 373-1707
  • Fabrikantnummer ZL36S0101
  • Fabrikant APEM
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Toggle Switches Ultra Miniature, Panel Mounting

Suitable for applications where space is at a premium
Epoxy sealed terminals prevent flux ingress
Silver plated brass contacts
Solder lug terminals
Brass actuator and thermoplastic case

Note

Care should be taken when soldering not to overheat the switch assembly
For biased switches '(on)' refers to momentary 'on' position

Approvals

7777

Specificaties
Kenmerk Waarde
Contact Configuration SPST
Switch Operation Latching
Contact Current Rating 500 mA @ 48 V dc
Mounting Type Panel Mount
Terminal Type Solder
Actuator Length 5.5mm
Actuator Material Brass
Contact Resistance 20mΩ
Maximum Operating Temperature +85°C
Operating Temperature Range -30 +85°C
Contact Material Silver Plated Brass
Minimum Operating Temperature -30°C
306 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1383 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 3)
3,18
(excl. BTW)
3,85
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
3 - 72
3,18 €
9,54 €
75 - 147
2,80 €
8,40 €
150 - 297
2,163 €
6,489 €
300 - 747
2,077 €
6,231 €
750 +
1,997 €
5,991 €
*prijsindicatie
Related Products
Moulded body with QMB long life wiping contacts, ...
Description:
Moulded body with QMB long life wiping contacts, screw terminals and pear-shaped toggleMounting bush 0.468in dia., length 11mm, single locating slotCase moulded with QMB.
The NKK Switches S Series Standard-Size Toggles come ...
Description:
The NKK Switches S Series Standard-Size Toggles come in low, medium and high capacity models. Ratings for the S Series range from 5A to 30A @ 125 VAC. The NKK S Series switch design features a sturdy construction with high ...
The NKK WT Series of environmentally sealed toggle ...
Description:
The NKK WT Series of environmentally sealed toggle switches have distinctive characteristics making them an ideal choice. The switches have an epoxy sealed base covered by an outer case which doubles the protection from dust and water. The switches are ...
Vertical and two types of right angle terminations ...
Description:
Vertical and two types of right angle terminations availableSuitable for low level switching applicationsTotally sealed, suitable for immersion cleaningWave solderable, will withstand 260°C for 5 secondsGold plated brass terminalsBrass actuator and PBT caseMinimum load current: 10mA at 50mV - 10μA ...