Toggle Switch Boot for use with 1820 Series

  • RS-stocknr. 103-9475
  • Fabrikantnummer 343.001.023
  • Fabrikant Marquardt
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Marquardt 1820 Series Toggle Switches

Marquardt 1820 series single and double pole toggle switches. The 1820 toggle switches are suitable for use in Class II appliances and are available in a choice of SPST, SPDT, DPST or DPDT switching formats including SPDT center off changeover with latching action contacts (see stock number 741-1003). A black Neoprene® lever cover which simply screws onto the toggle switch M12x0.75mm bush is available to protect the actuator from dust and water ingression.

Long mechanical and electrical life
Contact distance ≥3mm (apart from stock number 741-1003 which has a contact distance <3mm)
Contact resistance <100mΩ
Insulation resistance >100MΩ
Electrical connection via Solder tag or 4.8mm Faston/Quick Connect style terminals
UL 94 V-2 flammability rated

Note

See stock number 103-9475 for Neoprene® protective cover.
Neoprene is a registered trademark of DuPont.

Approvals

UL; CSA; ENEC

Specificaties
Kenmerk Waarde
Accessory Type Cap
For Use With 1820 Series
767 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
4,99
(excl. BTW)
6,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
4,99 €
Related Products
Splashproof switch covers to fit toggles with a ...
Description:
Splashproof switch covers to fit toggles with a 0.468 in dia. bushMoulded in black flexible PVC threaded insertHalf cover leaves end of toggle exposed whilst maintaining seal on shaftThis is especially useful where high wear on the switch is envisaged. ...
Neoprene O-rings between toggle/bushing and bushing/panelMounting: Bushing 15/32-32 ...
Description:
Neoprene O-rings between toggle/bushing and bushing/panelMounting: Bushing 15/32-32 THD locking through flat bush, key 14 mmInsulation resistance > 1000 MΩ @ 500 Vdc.
From Knitter Switch, the ET102 is a waterproof ...
Description:
From Knitter Switch, the ET102 is a waterproof toggle switch boot complete with mounting nut. With a height of 14.2 mm, this toggle switch boot is suitable for use with the MTA series. Miniature panel mount toggle switchesCopper alloy, silver ...
MTA Series panel mounting toggle switches with high ...
Description:
MTA Series panel mounting toggle switches with high temperature green UL 94V-0 housings and long baton style actuators with 1/4 - 40 threaded bushings. These MTA series panel mounting toggle switches are vertical mount with wire lug terminals. Gold flash ...