Aluminium Timing Belt Pulley, 9mm Belt Width x 3mm Pitch, 72 Tooth, Maximum Bore Dia. 8mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Part of an extensive range of High Torque Drive (HTD) timing pulleys in pilot bore type and taper lock bush type. The material used for smaller pulleys is Aluminium, medium sizes are in Steel, larger sizes in Cast Iron, all featuring flanges made from steel. HTD, CXP and CXA belts are all designed to run on these pulleys.

Specificaties
Kenmerk Waarde
Number of Teeth 72
Pitch 3mm
To Suit Belt Width 9mm
Bore 8mm
Maximum Bore Diameter 8mm
Outside Diameter 68.75mm
Hub Diameter 33mm
Material Aluminium
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,31
(excl. BTW)
16,11
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
13,31 €
5 - 9
12,77 €
10 - 24
12,49 €
25 +
12,24 €
Related Products
These pulleys are designed to be used with ...
Description:
These pulleys are designed to be used with synchronous classic timing belts and are manufactured from high strength material. They are easily re-bored to the required shaft size. 5.1mm ( 1/5 in.) pitchSuitable for belts 6.4mm ( 1/4 in.) and ...
5mm pitch x 9mm wide beltManufactured from high ...
Description:
5mm pitch x 9mm wide beltManufactured from high strength materialDesigned to be used with synchronous HTD beltsEasily re-bored to required shaft sizePulley width 14.5mm.
Manufacture of pulleys conforms to ISO 4183Compatible with ...
Description:
Manufacture of pulleys conforms to ISO 4183Compatible with all manufactured HTD® beltsDesigned to be used with appropriate taper.
8mm pitch x 30mm wide beltManufactured from high ...
Description:
8mm pitch x 30mm wide beltManufactured from high strength steelDesigned to be used with synchronous HTD beltsEasily re-bored to required shaft size.