Cast Iron Timing Belt Pulley, 28mm Belt Width x 8mm Pitch, 72 Tooth, Maximum Bore Dia. 50mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

HTD® Belt Pulleys

Manufacture of pulleys conforms to ISO 4183
Compatible with all manufactured HTD® belts
Designed to be used with appropriate taper

Specificaties
Kenmerk Waarde
Number of Teeth 72
Pitch 8mm
To Suit Belt Width 28mm
Maximum Bore Diameter 50mm
Outside Diameter 181.97mm
Hub Diameter 110mm
Material Cast Iron
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
86,91
(excl. BTW)
105,16
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
86,91 €
5 - 9
83,36 €
10 +
81,51 €
Related Products
These pulleys are designed to be used with ...
Description:
These pulleys are designed to be used with synchronous classic timing belts and are manufactured from high strength material. They are easily re-bored to the required shaft size. 5.1mm ( 1/5 in.) pitchSuitable for belts 6.4mm ( 1/4 in.) and ...
Manufacture of pulleys conforms to ISO 4183Compatible with ...
Description:
Manufacture of pulleys conforms to ISO 4183Compatible with all manufactured HTD® beltsDesigned to be used with appropriate taper.
5mm pitch x 15mm wide beltManufactured from high ...
Description:
5mm pitch x 15mm wide beltManufactured from high strength materialDesigned to be used with synchronous HTD beltsEasily re-bored to required shaft sizePulley width 20.5mm.
5mm pitch x 9mm wide beltManufactured from high ...
Description:
5mm pitch x 9mm wide beltManufactured from high strength materialDesigned to be used with synchronous HTD beltsEasily re-bored to required shaft sizePulley width 14.5mm.