- RS-stocknr.:
- 177-0095
- Fabrikantnummer:
- H3CR-F8N AC100-240/DC100-125
- Fabrikant:
- Omron
2 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 164,90
(excl. BTW)
€ 199,53
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 164,90 |
- RS-stocknr.:
- 177-0095
- Fabrikantnummer:
- H3CR-F8N AC100-240/DC100-125
- Fabrikant:
- Omron
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- ID
Productomschrijving
DIN 48 ´ 48-mm Twin Timers
Wide power supply ranges of High Voltage 100 to 240 VAC/100 to 125 VDC and Low Voltage 24 to 48 VAC/12 to 48 VDC.
ON- and OFF-times can be set independently and so combinations of long ON- or OFF-time and short OFF- or ON-time settings are possible.
Twenty-four time ranges from 0.05 s to 300 h depending on the model to be used.
Models with a flicker ON start or flicker OFF start are available.
Easy sequence checks through instantaneous outputs for a zero set value at any time range.
Length, when panel-mounted with a Socket, of 80 mm or less.
ON- and OFF-times can be set independently and so combinations of long ON- or OFF-time and short OFF- or ON-time settings are possible.
Twenty-four time ranges from 0.05 s to 300 h depending on the model to be used.
Models with a flicker ON start or flicker OFF start are available.
Easy sequence checks through instantaneous outputs for a zero set value at any time range.
Length, when panel-mounted with a Socket, of 80 mm or less.
Specificaties
Kenmerk | Waarde |
---|---|
Supply Voltage | 100 → 125 V dc, 100 → 240V ac |
Mounting Type | DIN Rail |
Mode of Operation | Flicker ON Start |
Time Range | 0.05 s → 30h |
Number of Contacts | 2 |
Number of Timer Functions | Multi Function |
Contact Configuration | DPDT |
Time Increment | Hours, Minutes, Seconds |
Maximum Current | 5A |
Maximum Voltage | 125 V dc, 240V ac |
Terminal Type | Crimp |
Switch Configuration | DPDT |
Minimum Voltage | 100V ac/dc |
Width | 48mm |
Power Supply | External |
Minimum Current | 10mA |
Length | 48mm |
Maximum Operating Temperature | +55°C |
Series | H3CR |
Depth | 84mm |
Minimum Operating Temperature | -10°C |