TE Connectivity C10 Series Axial Wirewound Resistor 10Ω ±5% 10W ±90ppm/°C

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IN
Productomschrijving

C10 Series 10W, Axial

Tyco C series economically priced resistors are capable of dissipating high power from a relatively small size in harsh environmental conditions

A range of high power resistors in small body sizes suitable for use in harsh environments. Their high stability and reliability make them particularly suitable for use in protection circuits.,The resistance wire element is wound onto a high purity ceramic substrate and employs an all welded cap and lead method of construction giving considerable strength and resistance to damage. The vitreous enamel protective coating is resistant to all normal PCB cleaning solvents.Application note. Terminations should not be bent closer than 1.5mm from the body. Recommended minimum bend radius is 1mm. For full rated power dissipation terminations should not be soldered closer than 4mm from the body.When cold, vitreous enamel has excellent insulation resistance; however the specific resistance decreases with increasing temperature. Therefore if the resistor is operating at or near maximum temperature it cannot be classed as insulating and should not be in contact with any conducting materials.

Specificaties
Kenmerk Waarde
Resistance 10 Ω
Power Rating 10W
Tolerance ±5%
Technology Wire Wound
Series C10
90 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
220 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,822
(excl. BTW)
2,205
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
1,822 €
9,11 €
125 - 245
1,244 €
6,22 €
250 - 495
1,09 €
5,45 €
500 +
0,992 €
4,96 €
*prijsindicatie
Verpakkingsopties
Related Products
The ER74 Series are a range of high ...
Description:
The ER74 Series are a range of high power dissipation Silicone coated resistors from TE Connectivity. Resistant to most solvents, the ER74 series has a tough silicone coating. The coating and marking are resistant to Trichloroethene VG, Genklene LV Hot ...
Flame-proof wirewound resistors with superior electrical and mechanical ...
Description:
Flame-proof wirewound resistors with superior electrical and mechanical characteristicsResistance wire wound on a fibreglass core and protected by a ceramic body Combines good thermal characteristics with high insulation resistance, and gives good physical protectionLead length allows vertical or horizontal ...
TE Connectivity SQ series high power resistors featuring ...
Description:
TE Connectivity SQ series high power resistors featuring fine non-alkali ceramic cores embodied in ceramic cases and sealed with inorganic silica filler. This provides the SQ series with high insulation resistance, low surface temperature, excellent TCR and an entirely fireproof ...
All welded constructionCeramic coreNon-flammable cement coatingTinned copper-clad iron ...
Description:
All welded constructionCeramic coreNon-flammable cement coatingTinned copper-clad iron leadsHigh power dissipation in small volumeIdeal for pulse applications.