Vishay 12Ω Wire Wound Resistor 7W ±5% RWM062212R0JA15E1

  • RS-stocknr. 485-2675
  • Fabrikantnummer RWM062212R0JA15E1
  • Fabrikant Vishay
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CZ
Productomschrijving

RWM 6x22 Series 7W, Axial

Enamelled wirewound power resistors
Axial leads
Fireproof

Approvals

CECC 40201-001//002, NFC 83210-001
CECC designation: RB57

A range of high power resistors in small body sizes suitable for use in harsh environments. Their high stability and reliability make them particularly suitable for use in protection circuits.,The resistance wire element is wound onto a high purity ceramic substrate and employs an all welded cap and lead method of construction giving considerable strength and resistance to damage. The vitreous enamel protective coating is resistant to all normal PCB cleaning solvents.Application note. Terminations should not be bent closer than 1.5mm from the body. Recommended minimum bend radius is 1mm. For full rated power dissipation terminations should not be soldered closer than 4mm from the body.When cold, vitreous enamel has excellent insulation resistance; however the specific resistance decreases with increasing temperature. Therefore if the resistor is operating at or near maximum temperature it cannot be classed as insulating and should not be in contact with any conducting materials.

Specificaties
Kenmerk Waarde
Resistance 12 Ω
Power Rating 7W
Tolerance ±5%
Technology Wire Wound
Series RWM 6x22
45 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
95 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
0,88
(excl. BTW)
1,06
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
0,88 €
4,40 €
125 - 245
0,746 €
3,73 €
250 - 495
0,638 €
3,19 €
500 - 1245
0,574 €
2,87 €
1250 +
0,538 €
2,69 €
*prijsindicatie
Verpakkingsopties
Related Products
Flame-proof wirewound resistors with superior electrical and mechanical ...
Description:
Flame-proof wirewound resistors with superior electrical and mechanical characteristicsResistance wire wound on a fibreglass core and protected by a ceramic body Combines good thermal characteristics with high insulation resistance, and gives good physical protectionLead length allows vertical or horizontal ...
Flame-proof wirewound resistors with superior electrical and mechanical ...
Description:
Flame-proof wirewound resistors with superior electrical and mechanical characteristicsResistance wire wound on a fibreglass core and protected by a ceramic body Combines good thermal characteristics with high insulation resistance, and gives good physical protectionLead length allows vertical or horizontal ...
TE Connectivity UPW Series ultra high stability resistors ...
Description:
TE Connectivity UPW Series ultra high stability resistors specially wound to minimise inductance and sealed in epoxy resin. The UPW series is suitable for many applications where close tolerance and low temperature coefficient are advantageous, i.e. actuators, gain setting networks, ...
AC05 CS series wire wound safety resistors are ...
Description:
AC05 CS series wire wound safety resistors are designed to be used as fusible safety resistors (or AC mains input resistors). The resistor fuses “without a bang” when AC mains voltage is applied. At the same time, it acts as ...