Welwyn W23 Series Axial Wirewound Resistor 6.8Ω ±5% 10W ±200ppm/°C

  • RS-stocknr. 199-5577
  • Fabrikantnummer W23-6R8JI
  • Fabrikant Welwyn
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

W23 Series 9W, Axial

The W23 series of wire wound resistors from Welwyn provide high-power dissipation for their size. They are highly reliable and highly stable. With an impervious vitreous enamel coating, these wire wound resistors are suitable for harsh environments.

Overload characteristics ideal for protection circuits
Stable and reliable
High-power dissipation
Constructed from a high purity ceramic substrate
500 V limiting element voltage

A range of high power resistors in small body sizes suitable for use in harsh environments. Their high stability and reliability make them particularly suitable for use in protection circuits.,The resistance wire element is wound onto a high purity ceramic substrate and employs an all welded cap and lead method of construction giving considerable strength and resistance to damage. The vitreous enamel protective coating is resistant to all normal PCB cleaning solvents.Application note. Terminations should not be bent closer than 1.5mm from the body. Recommended minimum bend radius is 1mm. For full rated power dissipation terminations should not be soldered closer than 4mm from the body.When cold, vitreous enamel has excellent insulation resistance; however the specific resistance decreases with increasing temperature. Therefore if the resistor is operating at or near maximum temperature it cannot be classed as insulating and should not be in contact with any conducting materials.

Specificaties
Kenmerk Waarde
Resistance 6.8 Ω
Power Rating 10W
Tolerance ±5%
Technology Wire Wound
Series W23
Minimum Operating Temperature -55°C
Maximum Operating Temperature +200°C
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each (In a Pack of 5)
1,724
(excl. BTW)
2,086
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
1,724 €
8,62 €
50 - 95
1,638 €
8,19 €
100 +
1,552 €
7,76 €
*prijsindicatie
Related Products
The KOA resistor is a BWR series solder ...
Description:
The KOA resistor is a BWR series solder wire wound ceramic technology axial resistor with a tolerance of ±5% and resistance of 330mohm. The power rating of the resistor is 5W and temperature coefficient resistance (TCR) of ±100ppm/K. • Excellent ...
TE Connectivity SQ series high power resistors featuring ...
Description:
TE Connectivity SQ series high power resistors featuring fine non-alkali ceramic cores embodied in ceramic cases and sealed with inorganic silica filler. This provides the SQ series with high insulation resistance, low surface temperature, excellent TCR and an entirely fireproof ...
A range of high power resistors in small ...
Description:
A range of high power resistors in small body sizes suitable for use in harsh environments. Their high stability and reliability make them particularly suitable for use in protection circuits.,The resistance wire element is wound onto a high purity ceramic ...
A range of high power resistors in small ...
Description:
A range of high power resistors in small body sizes suitable for use in harsh environments. Their high stability and reliability make them particularly suitable for use in protection circuits.,The resistance wire element is wound onto a high purity ceramic ...