KOA 1Ω Ceramic Resistor 2W ±1% BWR2C1R00F

  • RS-stocknr. 182-5813
  • Fabrikantnummer BWR2C1R00F
  • Fabrikant KOA
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

KOA Resistor

The KOA resistor is a BWR series solder wire wound ceramic technology axial resistor with a tolerance of ±1% and resistance of 1ohm. The power rating of the resistor is 2W and temperature coefficient resistance (TCR) of ±100ppm/K.

Features and Benefits

• Excellent in antipulse and inrush current
• High power resistors
• Operating temperature ranges between -40°C and 155°C
• Uses flame retardant insulated ceramic case

Specificaties
Kenmerk Waarde
Resistance 1 Ω
Power Rating 2W
Composition Wirewound
Tolerance ±1%
Axial/Radial Axial
Technology Ceramic
Series BWR
Minimum Operating Temperature -40°C
Maximum Operating Temperature +155°C
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each (In a Pack of 5)
3,554
(excl. BTW)
4,30
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 5
3,554 €
17,77 €
10 +
3,268 €
16,34 €
*prijsindicatie
Related Products
The MPC Series metal plate resistor element is ...
Description:
The MPC Series metal plate resistor element is built in special alloy of Ni/Cr/Fe/Cu which creates an uniform distribution of temperature over the resistive element. The metal band element is housed in and hermetically closed ceramic case. Safety design of ...
CFR Series are premium quality carbon film resistors ...
Description:
CFR Series are premium quality carbon film resistors whose ceramic core has a high alumina content offering power to size ratios not normally associated with carbon film productCFR Series are available in 5 power ratings from 1 ohm to 10 ...
The LR1F series resistors from TE Connectivity are ...
Description:
The LR1F series resistors from TE Connectivity are axial resistors featuring a superior quality metal film with 1% tolerance and a temperature coefficient down to 50 ppm. Ideally suited where low resistance and small sizes are required, the resistive element ...
LTO150 are the extension of LTO series. The ...
Description:
LTO150 are the extension of LTO series. The component is used in direct contact with heatsink. Fixation done by clip. 152 W at 45 °C case temperature heatsink mountedDirect mounting ceramic on heatsinkBroad resistance range: 0.03  to 1.3 MNon ...