ATE Electronics 7SR Series Fixed Resistor 33kΩ ±5% 10W ±30ppm/°C

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

ATE Electronics SR Series Capacitor Balancing Resistors

The SR series of capacitor balancing resistors from ATE Electronics offers ±5% tolerance as standard. These resistors are available in E24 Series ohmic values. Featuring a dielectric strength of 1000 V ac, these balancing resistors can be used to minimise voltage imbalance from capacitors connected in a series. SR capacitor balancing resistors offer temperature coefficient values of ±100 to ±30 ppm from 10 Ω upwards. SR series resistors have been vibration tested to IEC 60571-1 standards. SR10 resistors have a 31.8mm centre and SR7 resistors have a 22.2mm centre. The fixing centre dimensions cover most of the screw terminal electrolytic capacitor offering.

Standards

IEC 60571-1

Capacitor Balancing Resistors

Specificaties
Kenmerk Waarde
Resistance 33 kΩ
Power Rating 10W
Tolerance ±5%
Technology Wire Wound
Series 7SR
Minimum Operating Temperature -55°C
Maximum Operating Temperature +350°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 15/11/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 20)
4,695
(excl. BTW)
5,681
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
20 +
4,695 €
93,90 €
*prijsindicatie
Related Products
HS Series Wattage Range is 5 Watts to ...
Description:
HS Series Wattage Range is 5 Watts to 300 WattsVersatile product and custom design availableLow resistance, low inductance and higher voltageApplications in Braking Resistor; Balancing Resistor; Capacitor Charging & Discharging; Crowbar; Filter and Electrical Machinery general use.
Ceramic Composition Resistors,CCR Series are very high surge ...
Description:
Ceramic Composition Resistors,CCR Series are very high surge capacity resistors for capacitor charge/discharge and all energy absorption circuit applicationWide range Resistor Values and Tolerances.
AC05 CS series wire wound safety resistors are ...
Description:
AC05 CS series wire wound safety resistors are designed to be used as fusible safety resistors (or AC mains input resistors). The resistor fuses “without a bang” when AC mains voltage is applied. At the same time, it acts as ...