RSCAL(1770537)NO-GO RING GAUGE M8

  • RS-stocknr. 189-3348
  • Fabrikantnummer 16338 +Cal
  • Fabrikant Volkel
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

The thread NO-GO ring gauge must not screw into the part by hand more than two threads (without using excessive force). If the ring gauge can be screwed into the thread by more than two threads, the thread does not meet the desired requirements (=scrap). The no-go thread gauges are marked in red. The reference temperature for parts and gauges is 20° Celsius. Calibrated at a measurement laboratory separate from VÖLKEL using IAC thread scanners.

Specificaties
Kenmerk Waarde
Plug/Ring Ring
Gauge Type No Go Ring
Thread Size M8 x 1.25
Pitch Diameter 1.25mm
Tolerance 6g
Imperial or Metric Metric
Calibrated RSCAL
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
92,92
(excl. BTW)
112,43
(incl. BTW)
Aantal stuks
Per stuk
1 +
92,92 €
Related Products
Suitable for Metric 60° threadsNarrow blades permit use ...
Description:
Suitable for Metric 60° threadsNarrow blades permit use for internal & external screw threadsLocking device each end secures blades for storage or useCorrect pitch is determined by matching blade teeth with threadsBlades protected in sturdy steel case.
Penknife style screw pitch gaugesMilled blades. ...
Description:
Penknife style screw pitch gaugesMilled blades.
The Volkel No-Go ring gauge M8x1.25 is calibrated ...
Description:
The Volkel No-Go ring gauge M8x1.25 is calibrated at a measurement laboratory using IAC thread scanners. This No-Go thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference ...
A thread limit plug gauge is a combination ...
Description:
A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring. The go end of the thread plug gauge must screw ...