No-Go Ring Gauge M10

  • RS-stocknr. 177-0535
  • Fabrikantnummer 16340
  • Fabrikant Volkel
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Volkel No-Go Ring Gauge

The Volkel No-Go ring gauge M12x1.75 is calibrated at a measurement laboratory using IAC thread scanners. This No-Go thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference temperature for parts and gauge is 20°C. It is made from high-quality raw material. This gauge is mostly used as an inspection tool.

Features and Benefits

• Metric measurement system
• 6g tolerance
• High durability and reliability
• Compact size and rugged
• Easy to use
• Accurate

Certifications

• ISO1502
• DIN13

Certifications

• ISO1502
• DIN13

Specificaties
Kenmerk Waarde
Plug/Ring Ring
Gauge Type No Go Ring
Thread Size M10 x 1.5
Tolerance 6g
Imperial or Metric Metric
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
73,10
(excl. BTW)
88,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
73,10 €
Kalibratie-opties
Related Products
The Volkel Go No-Go plug gauge M10x1.25 is ...
Description:
The Volkel Go No-Go plug gauge M10x1.25 is a combination of GO and NO-GO plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread ...
The Volkel Go ring gauge M6x1 is calibrated ...
Description:
The Volkel Go ring gauge M6x1 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
The Volkel Go ring gauge M20x2.5 is calibrated ...
Description:
The Volkel Go ring gauge M20x2.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
The Volkel Go ring gauge M16x2 is calibrated ...
Description:
The Volkel Go ring gauge M16x2 is calibrated at a measurement laboratory using IAC thread scanners. This gauge must be possible to manually screw into the entire thread of the part, without using excessive force. The reference temperature for parts ...